edit | 2-ton Shop crane | all | safety
| 2024-09-27 6:05:58 AM |
edit | Back door monitor | all |
Is this still posting on Slack? I haven't seen it in a while... (JHache posted elsewhere...) | 2024-10-14 5:03:05 AM |
edit | Back door monitor | all |
What are the times we settled on with this thing? Ttenbergen (talk) 00:03, 2024 October 14 (CDT) | 2024-10-14 5:03:05 AM |
edit | Bambu Labs P1S FDM 3D Printer with Automatic Material System (AMS) | all | This page needs:
Photo of spools to illustrate AMS problems (cardboard spool, nearly empty spool with fixed end, nearly empty spool with loose end)
Loading AMS (John is working on this) | 2024-09-18 6:56:08 PM |
edit | Big Blue Laser | all | Marney Safety1
- Manual says
- "NEVER let the laser system operate if it will be unattended."
- "There is a significant risk of fire ... if the machine should experience a mechanical or electrical failure while operating."
| 2024-10-24 10:33:29 PM |
edit | Big Blue Laser | all | Photos needed:
lens assembly partly removed
lens assembly loose
position of mirror
wrapped Q-tip
single small workpiece vs multiple small workpieces in a row
Focus tool hanging
^ symbols
focus tool touching material | 2024-10-24 10:33:29 PM |
edit | Big Blue Laser | all | that is a bigger garbage issue... see Todo | 2024-10-24 10:33:29 PM |
edit | Big Red Laser | all | Safety1
Manual says "NEVER OPERATE THE LASER SYSTEM WITHOUT CONSTANT SUPERVISION OF THE
CUTTING AND ENGRAVING PROCESS. " | 2024-10-24 10:33:19 PM |
edit | Big Red Laser | all | that is a bigger garbage issue... see Todo | 2024-10-24 10:33:19 PM |
edit | Blue Laser Room vacuum | all | that is a bigger garbage issue... see Todo | 2024-06-21 4:49:30 PM |
edit | Breaker Panel | all |
- We have a bunch of breaker panels, some are not obviuous to find, and some are not even in our space but control some of our circuits.
- Would be nice to encode each as infrastructure tool, with location, and with at least the most unexpected info about them documented on the page.
- If we build this we might want to consider instructions such as whether a popped breaker is a cause for a near miss, since it generally means something went wrong, and it would allow us to track any patterns. Could put QR on panels to incident form.
| 2024-08-14 3:01:01 PM |
edit | Breaker Panel | all | See Eye Wash Station. | 2024-08-14 3:01:01 PM |
edit | Bug demonstrator page for cargo query cell merge with links | all | Once the problem is fixed in the extension, we can edit Rooms to link to the floors properly and then delete this page. | 2024-08-11 3:49:10 AM |
edit | Clamps | all | Marney
There was a clamps policy... where is that? | 2024-09-14 4:48:36 AM |
edit | Clean Work Table Policy (tmp) | all | Marney
We have a Clean Work Table Policy We also have "26. CLEAN WORK TABLE POLICY" in https://northforge.ca//wp-content/uploads/2023/01/North-Forge-Safety-Manual-Winnipeg_Oct.21-22.pdf or is that old?
They actually touch on various things, and many of them are relevant in other contexts. So, we may not need this policy if the other places contain the info we need.
If you agree that these address all of the clean worktable policy then could we eliminate it as its own policy?
If we agree that it can go, we need to re-define Member Council Clean Work Table Lead. | 2024-09-14 4:59:47 AM |
edit | CNC Spoilboard Storage | all |
- I think that longer-term storage in this cart is OK - some members have products that they sell regularly and would require a custom spoilboard/fixture. How should we handle this? Maybe ask that they "renew" by labelling freshly every 30 days, so old unused boards do not get forgotten
- I have started to do that, but that means contacting people every 30 days only to have them choose the easy route of "yes still need it". The cart is full now, so we kind of need a different way. Ttenbergen (talk) 11:18, 2024 August 13 (CDT)
| 2024-08-13 4:30:31 PM |
edit | CNC Spoilboard Storage | all | how should we deal with items that are there too long? This rule needs to be easy to enforce, if it is a hassle it won't get done. Can we just apply Storage#Consequences of inappropriate storage use? | 2024-08-13 4:30:31 PM |
edit | CNC woodworking room exhaust fan | all | Safety1
Flagging as contentious safety concern. | 2024-08-30 3:56:40 AM |
edit | CNC Woodworking room vacuum | all | Safety1
Flagging as contentious safety concern. | 2024-06-21 9:46:52 PM |
edit | CNC Woodworking Room/Precautions | all | Safety1
Flagging as contentious safety concern. | 2024-10-15 6:37:08 PM |
edit | CNC Woodworking Room | all | Safety1
Flagging as contentious safety concern. | 2024-04-30 2:04:09 PM |
edit | Compressed air distribution (pipes and hoses) | all | We have an SWP for this.
Make sure that all is here then archive that. Ttenbergen (talk) 12:30, 2024 October 15 (CDT) | 2024-10-15 5:30:38 PM |
edit | Compressed air gun | all |
- We have an SWP for this. The SWP does not include all of the allowed scenarios. One such scenario is allowing members to use compressed air system to blow off chips in wood (i.e. maps) that otherwise is very hard to impossible to blow it out any other way. Other ways have been proven to be impossible as it breaks the product. Other similar scenarios are acceptable.
- there is discussion by the Safety Committee on what should be permitted as of 2024-10. Ttenbergen (talk) 12:28, 2024 October 15 (CDT)
| 2024-10-15 5:37:18 PM |
edit | Confined space | all | Marney
we should move that over to the wiki | 2024-09-16 8:22:03 PM |
edit | Consequences of Inappropriate Storage | all | Marney
We had talked about a process for items in storage when your membership ends or you haven't paid for your spot - was a decision made? Tina had suggested a warning to the (former) member, with a set timeline, after which we would hire our garbage removal people to remove the items and forward the bill for this. Can we settle on this? | 2024-09-14 4:08:56 AM |
edit | Consequences of Inappropriate Storage | all | This would then likely also apply to Template:Temporary storage. | 2024-09-14 4:08:56 AM |
edit | Consumables | all | This doesn't yet list the items in the "consumables" data of tools. I am not sure that even makes sense to include here the way it's being used for now. May need to reconsider that data. | 2024-08-30 3:46:04 AM |
edit | CorelDraw for Fablab | all |
- Just a thought for now. Do we need this? What else should be included? Ttenbergen (talk) 23:17, 2024 September 1 (CDT)
- We would need PCs to teach this on. So maybe it would need to be in the laser room if more than two people want to take it. Could be in the Design Space if only 2 people.
| 2024-09-02 4:24:51 AM |
edit | CorelDraw | all | John
I usually save them as oldest version because it's easiest to remember and the vector functionality we use doesn't seem much affected by it. Would that be a reasonable instruction? | 2024-08-28 11:38:06 PM |
edit | CWI Portable Dust Collector (CNC) | all | Safety1
- Flagging as contentious safety concern.
| 2024-08-19 5:49:04 PM |
edit | Double Bevel Sliding Compound Miter Saw | all | Please fill out this section. Probably involves a wrench and maybe a blade stop of some sort? People are loosening screws that they don't need to be loosening, so make sure you've been shown how to do it properly. | 2024-08-17 2:30:11 AM |
edit | Dust extractor (CWI) shopbot and planer | all | Safety1
Flagging as contentious safety concern. | 2024-08-06 9:23:30 PM |
edit | Dust extractor cyclone CX427 | all | Safety1
Flagging as contentious safety concern. | 2024-06-21 8:21:42 PM |
edit | Ecopoxy Workstation | all | Epoxy Room/Precautions pulls into the tool portion of this page; maybe the tool template should pull this into the instruction portion instead. The idea is that when a whole room is affected by a hazard, we should really store it at the room level, and if it is stored at the room level, we shouldn't re-apply it at the tool level. | 2024-09-04 4:10:29 AM |
edit | Electronics recycling bin | all |
instructions for members when full
what does NF do wth this when full? | 2024-10-08 8:36:49 PM |
edit | Emergency Preparedness Drill | all | Safety
Apparently we are supposed to hold one before each meeting?
The Workplace Safety and Health Act and Regulations doesn't seem to specify this. Could we meet whatever specifically requires this in a different way? | 2024-10-15 5:19:51 PM |
edit | Emptying dust extractors and vacuums | all | We need a page for this!
Maybe the following will work.
- John and Tina should talk about discussions onthe wiki, there are several options.
- I meant this page almost as a general precautions page. The things you wrote are great and should be the instructions for the individual tools I think - for some I don't have pages yet. But my concern was more that we fuss to collect dust at the source but then make messes disposing of the dust. Are there best practices? For example, the bag in the wide belt sander extractor is so large to be just about unmanageable. And even for the others, beating out a vacuum filter on the inside of the garbage can releases a lot of dust. So, what is our deal? This might be related to the use of compressed air to clean things discussion.
| 2024-10-08 8:30:03 PM |
edit | Eye Wash Station | all |
We'll either need to find a way to link this to most rooms, or better yet, make it eye hazard dependent and link it that way... TT needs to think about this some more.
- There is a maps functionality for the wiki, and it can use any base map we want with coordinates. So we would be able to display e.g. tools or safety equipment via coordinate. I had thought about adding this initially but decided not to follow that squirrel for now. Let me know if I should reconsider that. Ttenbergen (talk) 22:42, 2024 August 13 (CDT)
Rooms and locations listed for convenience, there's probably a better way to do this in terms of the Wiki. John has also taken photos of the locations in case that's helpful later.
- That would be helpful later, because for the map we would probably encode each as its own "tool" (even if that stretches that category a bit), so a photo on there would be helpful. Ttenbergen (talk) 22:42, 2024 August 13 (CDT)
| 2024-08-14 3:42:23 AM |
edit | Eye Wash Station | all | Doug pointed out that we may not have good documentation on these, let's change that. Here is a start...
This should contain instructions on how to use the eye wash stations. It should probably also include whom to notify, and a link to the incident form, since use of a wash station would warrant a form. Maybe the form is how we find out that they were used, too.
As much as that is internal info, I think it might also be good to add if we have spares on hand, and possibly where we get them. | 2024-08-14 3:42:23 AM |
edit | Finished Print Box in the 3D Printing Room | all | This could use a photo | 2024-08-11 4:43:55 AM |
edit | Fire Alarm Pull Station | all | See Eye Wash Station. | 2024-08-17 2:33:40 AM |
edit | Fire Drill | all | Safety
We need to do a fire drill. | 2024-09-09 10:14:13 PM |
edit | Fire Drill | all | Should that be the director or the employer co-chair? | 2024-09-09 10:14:13 PM |
edit | Fire Extinguisher | all | See Eye Wash Station. | 2024-08-17 2:33:29 AM |
edit | Fire wood bin | all |
- what are the instructions when the bin is full? Who do members contact? What happens to excess?
| 2024-10-08 8:34:19 PM |
edit | Flammables Cabinet (epoxy room) | all | Marney
Do we have a policy. Is this consistent with that policy? We have a very brief policy in the safety manual; this page expands on it (adding information about WHMIS labelling). | 2024-09-17 8:39:44 PM |
edit | Flammables Cabinet (metal working room) | all | Marney
Do we have a policy. Is this consistent with that policy? We have a very brief policy in the safety manual; this page expands on it (adding information about WHMIS labelling). | 2024-09-17 8:39:51 PM |
edit | Flammables Cabinet (paint room) | all | Marney
Do we have a policy. Is this consistent with that policy? We have a very brief policy in the safety manual; this page expands on it (adding information about WHMIS labelling). | 2024-09-17 8:39:55 PM |
edit | Flammables Cabinets | all | Marney
Do we have a policy. Is this consistent with that policy? We have a very brief policy in the safety manual; this page expands on it (adding information about WHMIS labelling). | 2024-08-11 6:11:31 AM |
edit | FormLabs resin printers | all | I think we need a generic page to avoid duplication. Possibly a fake tool page so that all common details can be on this one, and all specific things on the individual printer's pages. Not sure yet how to best do this. | 2024-07-19 7:34:35 PM |
edit | Garbage | all | this needs more work...
- safe handling, assume it's not safe, gloves etc
- empty bins when (how full?)
- location for empty garbage bags
- two carts upstairs, one for sheet goods. Notify when full. Do we have any thoughts on the acceptability of just leaving bags in front of the cart?
- looks like we are using that box cart on 1 for garbage now. Is that a thing?
- guidelines about breaking things down so there are no sharp corners and max sizes for hard stuff in bags
- guidelines about securing bags with sawdust and not overfilling them so they aren't too heavy to put in the collection bin
- food garbage restrictions
- replace lids where present, either for safety as in metal room, or or fruit flies elsewhere
| 2024-10-15 5:12:07 PM |
edit | Giant Blue Laser | all | Photos: Raster table and vector grid, control panel icons | 2024-10-24 10:33:38 PM |
edit | Giant Blue Laser | all | Safety1
Instructions say "Stay with the laser. Never operate the laser system while unattended." | 2024-10-24 10:33:38 PM |
edit | Giant Blue Laser | all | that is a bigger garbage issue... see Todo | 2024-10-24 10:33:38 PM |
edit | Hazardous materials fridge | all |
Member supplied or are there North Forge supplies of soldering stuff in there as well?
Would this be the place for other chemicals that should be stored cool?
What are the rules around flammables in there? | 2024-09-04 5:22:15 AM |
edit | Hazardous waste | all | Marney
Nathan had said he would find out more. Did he ever get back to us? He mentioned Miller environmental being used by companies who have a lot of waste.
incl. empty cans, fluorescent bulbs, etc | 2024-10-17 2:00:57 AM |
edit | Hearing protection | all | Emelia Marney
- what are the instructions when we run out of ear plugs? Post on consumables? When there are 10 left?
- are there standard locations for this stuff?
| 2024-10-15 6:38:11 PM |
edit | Heat Press | all |
Add the material settings for NF supplied materials. Apparently these are on/near the material shelf.
Add examples of heat-sensitive sublimation materials that might need 15 second passes
Add instructions for changing from °C to °F | 2024-09-01 8:13:22 PM |
edit | HP DesignJet 800ps Large Format Printer | all | I seem to remember hearing Chris Brown talk about having successfully set up the Vinyl Cutter PC to print to this printer. Is that right? If so we might be able to retire the HP Plotter PC and clear up that workstation for other use. Ttenbergen (talk) 23:26, 2024 September 1 (CDT) | 2024-09-02 4:26:56 AM |
edit | Impaired, intoxicated or tired use of the Fablab | all |
Woodworking Sanding Room/Precautions mentions this, but it should likely be facility wide and with the right definiitons. Haven't read it yet but just stumbled over CAN/CSA-C22.2 NO. 60745-2-3-07/A1:13 + A2:13 (R2022) which might be helpful. Ttenbergen (talk) 23:09, 2024 October 17 (CDT) | 2024-10-18 4:09:50 AM |
edit | Instructions:Bambu Labs P1S FDM 3D Printer with Automatic Material System (AMS) | all | This page needs:
Photo of spools to illustrate AMS problems (cardboard spool, nearly empty spool with fixed end, nearly empty spool with loose end)
Loading AMS (John is working on this) | 2024-08-15 9:05:00 PM |
edit | Instructions:Big Blue Laser | all | Photos needed:
- lens assembly partly removed
- lens assembly loose
- position of mirror
- wrapped Q-tip
- single small workpiece vs multiple small workpieces in a row
- Focus tool hanging
- ^ symbols
- focus tool touching material
| 2024-10-15 6:38:57 PM |
edit | Instructions:CorelDraw | all | John
I usually save them as oldest version because it's easiest to remember and the vector functionality we use doesn't seem much affected by it. Would that be a reasonable instruction? | 2024-09-14 4:11:41 AM |
edit | Instructions:Double Bevel Sliding Compound Miter Saw | all | Please fill out this section. Probably involves a wrench and maybe a blade stop of some sort? People are loosening screws that they don't need to be loosening, so make sure you've been shown how to do it properly. | 2024-07-09 12:55:56 AM |
edit | Instructions:Ecopoxy Workstation | all | Epoxy Room/Precautions pulls into the tool portion of this page; maybe the tool template should pull this into the instruction portion instead. The idea is that when a whole room is affected by a hazard, we should really store it at the room level, and if it is stored at the room level, we shouldn't re-apply it at the tool level. | 2024-10-15 6:36:53 PM |
edit | Instructions:FDM Printing | all | Adding this to the discussion list so we know it needs work.
This page will eventually contain information on general FDM printing theory, like why support material is used or why Z-gap is important. Specific machine instructions will be associated with their appropriate page.
This page might also not end up existing. Let's see what the future brings. | 2024-07-09 1:30:17 AM |
edit | Instructions:Giant Blue Laser | all | Photos: Raster table and vector grid, control panel icons | 2024-08-19 4:14:03 AM |
edit | Instructions:Heat Press | all |
- Add the material settings for NF supplied materials. Apparently these are on/near the material shelf.
- Add examples of heat-sensitive sublimation materials that might need 15 second passes
- Add instructions for changing from °C to °F
| 2024-08-14 3:34:21 AM |
edit | Instructions:Laguna Bandsaw | all | Do we want to include instructions on where to put the sign to maximize chances of re-applying it and remembering to untension? | 2024-07-26 2:21:50 PM |
edit | Instructions:Large Finishing Tumbler | all |
According to the manual "Noise levels produced by various Mr Deburr vibratory systems, as measured at the C&M Topline factor, range from 81 to 93 decibels. Do we assume that our machine is at the high end of that range? Considering the small space it is in I would suggest so. If so, the hearing protection that should be used should be an NRR of at least 24. Does the fablab provide this at the tool or should the user provide their own? Ttenbergen (talk) 00:15, 2024 September 27 (CDT)
All other members performing other work in the room would have to wear the same hearing protection while this machine runs. | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
Again, we may need to consider safe lifting and moving | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
Does the fablab provide these? | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
Does the fablab provide these? Also, are protective gloves needed when removing the parts from the tumbler, and are nitrile gloves tough enough for that task? | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
I would like to combine the abrasive media info here because at least some of it can be used in both tumblers and the two sandblasters. Any objections if I move this section to Template:Abrasive media in the metalworking room that has already been applied to the main page of all these tools? | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
is a brush available for this purpose? Should the splash goggles be worn for this? | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
is this a common problem? If so we need to address that. | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
is this a common problem? If so we need to address that. And we need more detailed instructions on which braker. | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
is this standard operating procedure or safe work procedure? Not SWP | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
manual mentions risk of fire or explosion when using unapproved lubricants, this needs to be reflected here | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
Run machine how? | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
the bucket will have water, lubricant, abrasive and metal residue. Is it appropriate to dispose of this by pouring this in the lane?
pouring water into the lane in the winter will cause ice, probably not a hazard we want to create | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
the manual specifies pump precautions and the risk of pump burnout that are not reflected here as a hazard | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
we don't generally allow member maintenance; does the fablab approve this exception | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
what is the weight of these buckets? Do we need safe practices for members to handle these safely?
manual mentions plugging outlet drain for dry media like corncob; how do we do that? | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all |
Where and how do we appropriately do this? There is no utility sink. | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all | How? | 2024-10-15 6:38:00 PM |
edit | Instructions:Large Finishing Tumbler | all | what is L-100; we need a sds link on the main page for the tool | 2024-10-15 6:38:00 PM |
edit | Instructions:Reflow oven | all |
Does NF provide solder paste? If so we need details. If not, suggestions where to get it.
Any Hazardous waste output from this process? | 2024-10-22 5:29:33 PM |
edit | Instructions:Reflow oven | all |
if so, are there cleanup instructions or is that also a "broken" thing? | 2024-10-22 5:29:33 PM |
edit | Instructions:Reflow oven | all |
Is there a set in the IOT room? I so, where? If not, tell me to get a set from PA and we can designate them for this machine. Ttenbergen (talk) 12:29, 2024 October 22 (CDT) | 2024-10-22 5:29:33 PM |
edit | Instructions:Roland TrueVIS VG3-540 Printer | all | Just a note from using it today. I could not find any instructions for it around to remind me of the details. Ttenbergen (talk) 23:18, 2024 October 27 (CDT) | 2024-10-28 10:41:22 PM |
edit | Instructions:Safety Speed Panel Saw | all |
this still needs SWPs etc, I am just adding some observations from today
the saw portion can tilt to a horizontal position. Is there any safe or reasonable way to use it that way? | 2024-08-06 9:11:40 PM |
edit | Instructions:Sawstop Industrial Cabinet Saw | all | Do we have a splitter? If not, remove? | 2024-08-14 4:38:05 AM |
edit | Instructions:Sawstop Industrial Cabinet Saw | all | Want to improve this page? Here are some instructions you can add:
- How and when to use safety devices (featherboards, push sticks)
- How and when to use North Forge's sleds and fixtures
- What types of blades are suitable for different jobs
We also need photos:
- Blade change procedure
- Photo of SawStop indicator lights
- Sawstop Override key
| 2024-08-14 4:38:05 AM |
edit | Instructions:ShopBot 3-Axis CNC Mill | all | Want to make this page better? Edit it yourself, or talk to John Hache. North Forge would like to make sure instructions are clear and easy to use. | 2024-10-24 1:16:19 PM |
edit | Instructions:Spot Welder | all | Jeff
Is there an outlet we can recommend or require for this, ideally one that would be open to a member re-set? | 2024-09-14 5:18:31 AM |
edit | IR thermometer (welding) | all | Marney Safety
There was talk about needing one, and we bought several. I think we then said that this wouldn't be practical, and there was some different approach to the hot works / fire watch... what came of this?
I don't think there is actually an IR thermometer down there. | 2024-09-14 4:07:53 AM |
edit | IT at the Fablab | all | Index page that needs more work to pull contents together. | 2024-09-14 4:54:42 AM |
edit | Laguna Bandsaw | all | Do we want to include instructions on where to put the sign to maximize chances of re-applying it and remembering to untension? | 2024-08-17 2:30:17 AM |
edit | Large Finishing Tumbler | all |
- According to the manual "Noise levels produced by various Mr Deburr vibratory systems, as measured at the C&M Topline factor, range from 81 to 93 decibels. Do we assume that our machine is at the high end of that range? Considering the small space it is in I would suggest so. If so, the hearing protection that should be used should be an NRR of at least 24. Does the fablab provide this at the tool or should the user provide their own? Ttenbergen (talk) 00:15, 2024 September 27 (CDT)
- All other members performing other work in the room would have to wear the same hearing protection while this machine runs.
| 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
Again, we may need to consider safe lifting and moving | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
Does the fablab provide these? | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
Does the fablab provide these? Also, are protective gloves needed when removing the parts from the tumbler, and are nitrile gloves tough enough for that task? | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
I would like to combine the abrasive media info here because at least some of it can be used in both tumblers and the two sandblasters. Any objections if I move this section to Template:Abrasive media in the metalworking room that has already been applied to the main page of all these tools? | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
is a brush available for this purpose? Should the splash goggles be worn for this? | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
is this a common problem? If so we need to address that. | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
is this a common problem? If so we need to address that. And we need more detailed instructions on which braker. | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
is this standard operating procedure or safe work procedure? Not SWP | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
manual mentions risk of fire or explosion when using unapproved lubricants, this needs to be reflected here | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
Run machine how? | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
the bucket will have water, lubricant, abrasive and metal residue. Is it appropriate to dispose of this by pouring this in the lane?
pouring water into the lane in the winter will cause ice, probably not a hazard we want to create | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
the manual specifies pump precautions and the risk of pump burnout that are not reflected here as a hazard | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
we don't generally allow member maintenance; does the fablab approve this exception | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
What are the rules, processes and costing around those? | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
what is the weight of these buckets? Do we need safe practices for members to handle these safely?
manual mentions plugging outlet drain for dry media like corncob; how do we do that? | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all |
Where and how do we appropriately do this? There is no utility sink. | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all | How? | 2024-09-24 5:50:56 PM |
edit | Large Finishing Tumbler | all | what is L-100; we need a sds link on the main page for the tool | 2024-09-24 5:50:56 PM |
edit | Laser Room/Precautions | all | that is a bigger garbage issue... see Todo | 2024-10-15 6:38:26 PM |
edit | Laser Room | all | that is a bigger garbage issue... see Todo | 2024-04-30 2:04:10 PM |
edit | Laser Rotary Attachment (Big Red) | all | that is a bigger garbage issue... see Todo | 2024-08-19 3:59:15 AM |
edit | Laser Rotary Attachment (Helix) | all | that is a bigger garbage issue... see Todo | 2024-07-23 5:20:27 PM |
edit | Laser Rotary Attachments | all | that is a bigger garbage issue... see Todo | 2024-06-10 1:50:14 AM |
edit | Little Blue Laser (Epilog Helix 8000) | all | Safety1
Manual says "NEVER let the laser system operate if it will be unattended." | 2024-10-24 10:33:23 PM |
edit | Little Blue Laser (Epilog Helix 8000) | all | that is a bigger garbage issue... see Todo | 2024-10-24 10:33:23 PM |
edit | Lock-out/Tag-out procedures | all | Tina
make query | 2024-10-21 8:32:36 PM |
edit | Lost and Found | all | Marney
I think the closest thing we have is to leave it where it is and post on general or the room where you found it. If it's large and in the way, put it on the jail. Anyone, please correct me if we have an actual lost and found. | 2024-09-14 4:55:15 AM |
edit | Maker requests | all | Marney
What is the process, URL, email address, etc. Maker in Residence or what was that called?
Incoming requests get sent to Slack channel 125-makers-requests and any interested member is encouraged to contact the requestor to bit on the request. | 2024-09-14 5:36:22 AM |
edit | Maker's Market | all | Marney Ashley
- how do makers get things in there?
- when there is a sale, a message goes out to Slack channel makers-market
- how does money get to members
| 2024-10-14 5:11:33 AM |
edit | Material Safety Data Sheet (MSDS) | all | TT needs to look at how SDSs are encoded and how we can properly list them when there is more than one. | 2024-10-15 7:15:23 PM |
edit | Member Council Clean Work Table Lead | all | This is inconsistent with what the current role holder does. | 2024-09-14 4:58:32 AM |
edit | Member Council Co-Chair | all |
needs terms of reference
this one doesn't appear to be in https://northforge.ca//wp-content/uploads/2023/01/North-Forge-Safety-Manual-Winnipeg_Oct.21-22.pdf | 2024-09-09 8:14:46 PM |
edit | Member Council Consumable Lead | all |
Labels lockers and monitors locker status (Rentable member storage)
- Don't think that's true, Emelia does this
| 2024-09-09 8:33:52 PM |
edit | Member Council Training Lead | all |
Training committee ? The status of training committee is currently uncertain due to organizational difficulties. The Wiki will help. | 2024-09-10 1:08:24 PM |
edit | Member Council | all |
What do we want to say about this? List roles/people? Ttenbergen (talk) 23:33, 2024 August 22 (CDT)
- That describes the meetings, but what is member council's role? I realize we discussed this after the meeting on Tuesday, so I am happy enough to leave this question open for now. Ttenbergen (talk) 22:27, 2024 August 23 (CDT)
| 2024-10-15 7:16:40 PM |
edit | Member Council | all | what about these? | 2024-10-15 7:16:40 PM |
edit | Member Filament Storage in the 3D Printing Room | all | Do we want to limit how many rolls a member can store here? | 2024-08-14 4:20:16 AM |
edit | Member Filament Storage in the 3D Printing Room | all | This could use a picture. | 2024-08-14 4:20:16 AM |
edit | Metal recycling bin (general assembly area) | all | Edit in Template:Metal recycling
what does NF do with the scrap when we hear the bin is full? | 2024-10-08 8:27:56 PM |
edit | Metal recycling bin (general assembly area) | all | Edit in Template:Metal recycling
what to do if the bin is full. post on slack? Where? | 2024-10-08 8:27:56 PM |
edit | Metal recycling bin (metal room) | all | Edit in Template:Metal recycling
what does NF do with the scrap when we hear the bin is full? | 2024-10-08 8:28:13 PM |
edit | Metal recycling bin (metal room) | all | Edit in Template:Metal recycling
what to do if the bin is full. post on slack? Where? | 2024-10-08 8:28:13 PM |
edit | Metalworking Room | all | Safety Marney
How would one assess the "as required"? dust in the air remains after a previous member leaves, right? So how would a member know when not to use a respirator in there? I can see where Fred is only required when welding or similar, so maybe it should not be a room level precaution but specific to tools like welders? Ttenbergen (talk) 22:59, 2024 August 13 (CDT)
- Where do you see "as required"? Mstapley (talk)
- I meant the "may require". If we put particles in the air they don't just affect the person using a specific tool, and not only for the duration of tool use. The smaller a particle the deeper it can get into the lungs and the longer it will be suspended, and some of the smallest stay suspended for hours or days. My quote "as required" may have been from before John updated this to clarify as per next line. Ttenbergen (talk) 13:59, 2024 October 3 (CDT)
- Updated to clarify what is required at all times vs what may be required John Hache (talk)
- Some other equipment prohibits the use of gloves. I think this section should only have the requirement for the whole room, e.g. respirators in the woodworking room. I can't think of any hazard in this room like that, short of the facility-wide requirement to wear steel toed shoes.
| 2024-10-15 6:37:22 PM |
edit | Metalworking Room | all | Safety Marney
I changed that a bit, but really still not sure if it's reasonable. You may be working there and then someone else shows up and starts to work. Should you stop what you are doing and chat with them? I would not even notice they are there. So maybe the answer is, expect a hazard and wear the appropriate PPE in this space. | 2024-10-15 6:37:22 PM |
edit | Metalworking Room | all | Safety Marney
If we require an IR thermometer (welding) we should label it it as safety item not to be removed. By adding the tool page to the Category:Safety we have added it to our Safety Inspection checklist. Is there actually one down there? Yes, it should be. I haven't looked lately but I did buy one. | 2024-10-15 6:37:22 PM |
edit | North Forge:AutoWikiBrowser for bulk edits | all | TT to complete | 2024-10-22 5:06:08 PM |
edit | North Forge:Hazard | all |
Additional fields? Ttenbergen (talk) 22:42, 2024 October 13 (CDT) | 2024-10-29 1:14:53 PM |
edit | North Forge:Hazard | all |
see Safety Terminology#General Hazards? Alternate standard systems/terms we can use? Should this be encoded? (John)
- Sounds like something we should encode; it's actually what I was aiming for under JHA type above. Your list is different, though. I'd like to settle on a standard. Is there one that applies to JHA and to signage? I only want to include it if it would be useful for something specific, such as Safety Signage,
| 2024-10-29 1:14:53 PM |
edit | North Forge:Hazard | all |
The stuff on this page is not built yet, but I plan to put it together this week, so talk to me ASAP if you don't want it this way. Ttenbergen (talk) 22:42, 2024 October 13 (CDT) | 2024-10-29 1:14:53 PM |
edit | North Forge:Hazard | all |
we could set each tool to list the "Unknown Hazard" hazard that escalates ranking in North Forge:Risk Assessment Matrix. Edit the tool and instead apply the "No associated Hazard" or specific hazard and that gets hidden and de-escalate the RAM placement. Could help motivate updates. Or could disengage. open to thoughts. Ttenbergen (talk) 22:58, 2024 October 13 (CDT) | 2024-10-29 1:14:53 PM |
edit | North Forge:Hazard | all | Tina
List of pages with hazards not edited in 3 years for North Forge:Workplace Safety and Health Program
add to North Forge:Job Hazard Analysis a query here to show the tools and sdss that have hazards, how many, and when last edited. | 2024-10-29 1:14:53 PM |
edit | North Forge:Job Hazard Analysis | all | Tina
once North Forge:Hazard is implemented, add a query here to show the tools and sdss that have hazards, how many, and when last edited. Ttenbergen (talk) 11:15, 2024 October 15 (CDT) | 2024-10-15 6:30:03 PM |
edit | North Forge:LOTO | all |
The stuff on this page is not built yet, but I plan to put it together this week, so talk to me ASAP if you don't want it this way. Ttenbergen (talk) 22:31, 2024 October 13 (CDT) | 2024-10-22 5:37:01 PM |
edit | North Forge:LOTO | all | John
I just had a look at both the general concept of LOTO and our submission for it. I have misunderstood it a bit, I thought it was what workers need to do to flag broken and dangerous equipment to stop others from using it. It now sounds like it is really only a maintenance related concept. We still need the member lockout process but we might need two different concepts and sets of instructions. Thoughts? Ttenbergen (talk) 15:50, 2024 October 21 (CDT)
- I knew of the other context for it, where you're trying to prevent others from activating the equipment when you're working on it and injuring you, but still used the same term for both types. All equipment would need procedures to temporarily disable a tool. Would we only need the stricter LOTO procedure for larger equipment? Someone wouldn't be able to turn on any small equipment while you're working on it directly... John Hache ([[User talk[John Hache|talk]]) 19:25, 2024 October 21 (CDT)
- A lot of the current instructions require the lockout kits Jeff and I have, so we would need to tweak these for the user lockout since they would not have those.
| 2024-10-22 5:37:01 PM |
edit | North Forge:MadeSafe audit | all | Need to set this up. Ttenbergen (talk) 23:27, 2024 October 13 (CDT) | 2024-10-14 4:27:08 AM |
edit | North Forge:Maintenance | all |
How do you keep track of what needs maintenance and when you do it now? Anything that can be run through OCR? Mpatryluk (talk) 01:08, 2024 September 7 (CDT)
- I have some outlook tasks, Jeff has many things in his head. A lot of the maintenance is by looking at it and saying, yup, looks like it needs it. Break-fixes generally come from Slack broken. Jeff tracks tasks completed as part of some timekeeping app that can export data but it is pretty much non-structured. I track some tasks completed in outlook as part of scheduling the next round. Ttenbergen (talk) 22:05, 2024 September 7 (CDT)
| 2024-10-14 5:33:01 AM |
edit | North Forge:Risk Assessment Matrix | all |
The stuff on this page is not built yet, but I plan to put it together this week, so talk to me ASAP if you don't want it this way. Ttenbergen (talk) 22:42, 2024 October 13 (CDT) | 2024-10-15 6:31:55 PM |
edit | North Forge:Safe Work Procedure | all |
I'd like to move Safe Work Procedures content here, unless it should be move to the other broken out concepts. Ttenbergen (talk) 23:21, 2024 October 13 (CDT) | 2024-10-15 6:31:43 PM |
edit | North Forge:Safety Quiz | all | There was talk about setting up a quizz but I asked to hold off because the wiki should be able to do this.
Some questions around privacy etc. Ttenbergen (talk) 00:55, 2024 October 15 (CDT) | 2024-10-15 5:57:43 AM |
edit | North Forge:SDS | all |
- Do rooms need to be able to? EG the ecopoxy resins aren't really linked to a tool. But then again, I had already realized that that will be a problem so had made the arbitrary tool page Ecopoxy Workstation. So, that may be better than allowing an SDS linking to a room directly, but I am open to suggestions on that Ttenbergen (talk) 22:46, 2024 October 13 (CDT)
| 2024-10-15 7:14:40 PM |
edit | North Forge:SDS | all |
The stuff on this page is not built yet, but I plan to put it together this week, so talk to me ASAP if you don't want it this way. Ttenbergen (talk) 22:42, 2024 October 13 (CDT) | 2024-10-15 7:14:40 PM |
edit | North Forge:SDS | all |
we could set each tool to list the "Unknown SDS" with a "Unknown Hazard" hazard that escalates ranking in North Forge:Risk Assessment Matrix. Edit the tool and instead apply the "No associated SDS" SDS and that gets hidden and de-escalated. Could help motivate updates. Or could disengage. open to thoughts. Ttenbergen (talk) 22:58, 2024 October 13 (CDT) | 2024-10-15 7:14:40 PM |
edit | North Forge:Tool pages | all | Tina
add a "what links here" button to the infobox
find out the inventory-ish things we wanted on here
how do we want to deal with multi-room things? some like the compressed air system are legit multi, some others exist as instances.
info needed for Decision making process for equipment purchases
info needed for North Forge:LOTO
info needed for inventory
update SDS to store link to North Forge:SDS | 2024-10-15 8:21:29 PM |
edit | North Forge:Using this wiki | all |
Additional file formats: I know what a wiki is supposed to do WRT documentation but can we also upload files like instruction manual PDFs so that for tools that don't have any training or documentation that there's still a user manual they can consult, even if the contents of the PDF aren't searchable by the wiki? There's a space for a link to the manual but every few months/years there seems to be a shakeout/reorg at some company and products go from "supported" to "archived" or are dropped entirely and the link no longer works. Thoughts? Mpatryluk (talk) 01:03, 2024 September 7 (CDT)
- I am worried that by allowing .doc and .pdf file formats we will end up with content uploaded that should be integrated. I was trying to preempt that fight by keeping those turned off. You make a good point about link rot. Simply uploading someone else's .pdf file holds copyright questions, too. Might need further discussion. Ttenbergen (talk) 22:07, 2024 September 7 (CDT)
| 2024-10-15 4:44:36 PM |
edit | North Forge:Using this wiki | all | Tina
The wiki structure content is outdated. Ttenbergen (talk) 00:34, 2024 October 14 (CDT) | 2024-10-15 4:44:36 PM |
edit | North Forge:Workplace Safety and Health Program | all | Emelia, Marney, audit
- do we have documents for these things? Let;s not fill in too much here, but if we have them we should add the content to the wiki and then link as appropriate. For example, the (c) resources should likely have their own page in the main namespace. Ttenbergen (talk) 11:15, 2024 October 15 (CDT)
| 2024-10-15 4:34:59 PM |
edit | Oily Rags Bin (metal working room) | all | When and how do we consider them dried enough, and who then puts the rags into the oily rag bin? | 2024-10-08 8:20:37 PM |
edit | Oily Rags Bin (paint room) | all | When and how do we consider them dried enough, and who then puts the rags into the oily rag bin? | 2024-08-11 6:10:07 AM |
edit | Oily Rags Bins | all | When and how do we consider them dried enough, and who then puts the rags into the oily rag bin? | 2024-08-11 6:07:06 AM |
edit | Paint Room Drying Shelf | all |
do we have rules around this already? Is this consistent? Ttenbergen (talk) 23:27, 2024 August 13 (CDT) | 2024-08-14 4:27:50 AM |
edit | Paint Room Drying Shelf | all | This could use a photo. | 2024-08-14 4:27:50 AM |
edit | Paint Room Fume Extractor | all | Details, any reference to a policy about paint room use and recording? | 2024-09-14 5:06:27 AM |
edit | Personal Protective Equipment | all |
intended as an index page for PPE related pages, not so much for all about them. | 2024-10-15 4:56:52 PM |
edit | Progressive discipline | all | Marney
We had something about this... was it a housekeeping policy? Should we phrase it more general like this so it can be referenced? Especially since in some cases it applies to safety issues as well? | 2024-09-14 4:39:52 AM |
edit | Reflow oven | all |
Does NF provide solder paste? If so we need details. If not, suggestions where to get it.
Any Hazardous waste output from this process? | 2024-09-26 1:51:11 AM |
edit | Reflow oven | all |
if so, are there cleanup instructions or is that also a "broken" thing? | 2024-09-26 1:51:11 AM |
edit | Reflow oven | all |
Is there a set in the IOT room? I so, where? If not, tell me to get a set from PA and we can designate them for this machine. Ttenbergen (talk) 12:29, 2024 October 22 (CDT) | 2024-09-26 1:51:11 AM |
edit | Returning members | all | John Marney
we will need to consider when Training Validation is required and when not. Ttenbergen (talk) 16:52, 2024 October 21 (CDT) | 2024-10-21 9:52:53 PM |
edit | Returning members | all | Marney Membership
Don't think we explain suspending ones membership (as in putting it on hold) anywhere. Is that the official term for it? If so I will make a page for it and get it linked in somehow. Do we have any documentation about this now? Ttenbergen (talk) 20:59, 2024 October 16 (CDT) | 2024-10-21 9:52:53 PM |
edit | Returning members | all | Safety Training John Marney Meta-training
What are our recommendations for returning members?
At some point there was talk about re-training being available for free for previously trained members, as long as they don't require an extra sesssion. Did we ever formalize that?
- Emelia follows a process for recurring members needing to take safety and orientation again. If we have new equipment and process changes since the member last was a member, traing is always mandatory before they can use the equipment again. This is usually proficiency. Mstapley (talk)
- That sounds like quite a decision Emelia has to make there. Would she be sufficiently in the loop to know if e.g. the welding training has changed since that particular person was last a member? Is there documentation around this?
Ttenbergen (talk) 20:59, 2024 October 16 (CDT)
- Definitely no documentation for equipment training, no formal process or anything. If Emelia has documentation for the safety orientation, please send it along -John
| 2024-10-21 9:52:53 PM |
edit | Risk Assessment Matrix | all |
need to set this up. | 2024-10-15 6:17:13 PM |
edit | Roland TrueVIS VG3-540 Printer | all | Just a note from using it today. I could not find any instructions for it around to remind me of the details. Ttenbergen (talk) 23:18, 2024 October 27 (CDT) | 2024-09-01 8:26:25 PM |
edit | Safe Work Procedures | all |
I plan to set up a North Forge:Hazard template. It will take care of this content, so let's discuss further there. Ttenbergen (talk) 22:43, 2024 October 13 (CDT) | 2024-10-15 7:28:34 PM |
edit | Safe Work Procedures | all |
LOTO will get its own field for each tool. The safe work audit checks for this so I want to be able to pull that into a page. See more at North Forge:LOTO. Ttenbergen (talk) 22:11, 2024 October 13 (CDT) | 2024-10-15 7:28:34 PM |
edit | Safe Work Procedures | all |
Place for Safe Work Procedure information (formatting, contents, etc). Maybe this will end up as a template?
- The spot for it will definitely be part of a template. But we will need instructions for how to write them. Meta information. There is actually a different namespace for that sort of thing on mediawikis. In the case of this wiki, its North Forge with pages like North Forge:Using this wiki (which is very outdated). Ttenbergen (talk) 22:01, 2024 October 11 (CDT)
- In that case maybe I can use this page to start discussing things like the contents and instructions, things we can use to build the wiki template page, etc
| 2024-10-15 7:28:34 PM |
edit | Safe Work Procedures | all |
Since PPE mitigates hazards, why would this be its own section? If you really want to list it we could re-query the PPE from the hazard section, but why duplicate and clutter? Ttenbergen (talk) 22:11, 2024 October 13 (CDT) | 2024-10-15 7:28:34 PM |
edit | Safe Work Procedures | all |
The first aid for hazardous materials should be stored with the North Forge:SDS information. We might want to extend that concept where a material doesn't qualify for an SDS, but its hazardous material property requires SDS like info (molten metal, hydraulic fluid injection, etc). Ttenbergen (talk) 22:11, 2024 October 13 (CDT) | 2024-10-15 7:28:34 PM |
edit | Safety at the Fablab | all | This needs fleshing out | 2024-10-15 4:58:07 PM |
edit | Safety Committee | all | Safety Marney
Is the fablab the same workplace as the mothership under the act? Can we have a separate committee or do they need to be combined? | 2024-10-29 2:04:36 PM |
edit | Safety Dashboard | all | safety
is that something we want to do? | 2024-09-27 5:35:12 AM |
edit | Safety footwear | all | For welding there was a requirement for boots, what were the details? | 2024-10-15 5:42:22 PM |
edit | Safety Incident Reporting | all | Who maintains the automation under the hood? | 2024-09-09 9:32:39 PM |
edit | Safety Inspection | all | Safety
Emelia, could we put the checklist for these inspections on here instead of wherever it lives now? There is one on https://northforge.ca//wp-content/uploads/2023/01/North-Forge-Safety-Manual-Winnipeg_Oct.21-22.pdf but I think you have a more recent version. | 2024-09-27 6:00:51 AM |
edit | Safety Orientation | all |
| 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all |
In many ways this is the only consistent onboarding some members will get. Tempting to tell them everything then. But the more we add, the less will stick. So we'll need to decide how to balance that. EG could some of the specifics be pushed to the initial safety portion of room level training rather than being handled at the initial safety orientation? Which? And can we ensure trainers actually do it? | 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all |
Is it a good idea to include an overview of more specific hazards that might only apply to operators?
- I don't think so due to information overload, maybe in specific situations. Orientation should be aimed at things all members need to know, operator specific could be handled during training -John
| 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all |
Is there more than the Flammables Cabinets and the Hazardous materials fridge?
- Yes, member storage and private workspaces can have hazardous materials.
- do we cover that in the orientation, though?
- No, but we might want to have guidelines for member storage, maybe encourage people to store chemicals in secondary containers in case of spill, ID things that we don't want stored at North Forge if any, that sort of thing
| 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all |
This is currently organized in the same way that you would conduct the orientation in person - that means facility-wide information like air gun use is nested under certain rooms. Does it make sense to keep this page organized that way?
- I think we can do better. Will need to figure out the details. Tool hazards will have a field to say if they affect the room. Maybe all room level hazards should be discussed? Or should we have an additional value for that field "Room and Orientation" to put them here? Or are they two separate things?
- A more productive approach is to figure out what the safety orientation should theoretically contain, then fill out this page to match that. Right now the checklist contains things that would be better handled during training.
| 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all | Do all visitors need to sign a waiver as well? | 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all | does it explain how to record materials when using the Paint Room Fume Extractor, or what can be stored on the Paint Room Drying Shelf and for how long? The orientation covers information about recording materials, not sure about shelves | 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all | Marney
the checklist we have should go here or be linked from here.
- John has added a summary of topics that needs links to the relevant pages below. We can also link to the entire checklist on the community portal
- The checklist itself should move here, both to make sure it's updatable and also to make sure that the way that is accessible to members inherently links to places on the wiki where they can remind themselves of what they learned, or can find out more. John is working on this, I put anything that could potentially be linked as italics so others can find them more easily and add the relevant links.
| 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all | These are mentioned in the checklist but I don't know what is actually said during the orientation. Given that we haven't worked these procedures out yet, I doubt it is accurate. In general, people should either disable the equipment or put up a broken sign that covers either the power source or controls for the equipment (such that you have to remove the sign to be able to operate the equipment) | 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all | This is included in the checklist but this is better handled during training. | 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all | This is included in the checklist, but is it better handled during training? | 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all | We should discuss this further and refine it. We (and the Act) say that you are responsible for others' safety (like if someone with no PPE wanders in, you should stop what you're doing), but it can be difficult to pay attention to what others are doing when you're trying to get your own work done. | 2024-10-17 1:47:42 AM |
edit | Safety Orientation | all | What is the limit? | 2024-10-17 1:47:42 AM |
edit | Safety Speed Panel Saw | all |
this still needs SWPs etc, I am just adding some observations from today
the saw portion can tilt to a horizontal position. Is there any safe or reasonable way to use it that way? | 2024-06-10 1:50:05 AM |
edit | Safety Terminology | all |
Does this come from a standard? If so, which? Ttenbergen (talk) 21:10, 2024 October 16 (CDT)
- No, just things that I thought were concise and effective at the time I wrote this for the SWP template document. I haven't been able to find any standard system beyond WHMIS -John
- The pictographs in ISO7010 might be a starting point. Big list, though. Reading through what you have, does it need an eye hazard? Re the distinction with chemical ones, aren't those two more a result than a hazard? I mean, stuff gets on you (airway, skin, eye, digestive tract) and then has that effect. So wouldn't the route be the hazard (as you have with inhalation) and the chemical portion the "what does it do there" in addition to allergies or acute toxicity? Somehow I am sure a standard exists for this. I'll ask someone I met at a mediawiki conference who does risk analysis for NASA. If he doesn't know one I will concede there is no such thing :-) Ttenbergen (talk) 09:59, 2024 October 19 (CDT)
I remembered a concept from one of the mediawiki conferences I went to: ontologies. What I am finding is not really the topic of this page, and not really part of North Forge's Fablab documentation, so I am putting it on North Forge:OHS Ontologies; in the end I have not yet found one that's all that helpful, though. Ttenbergen (talk) 10:05, 2024 October 20 (CDT) | 2024-10-20 3:05:44 PM |
edit | Sandblasting Cabinet (large) | all |
How about the small one? Do we have a default material for that? | 2024-09-24 5:44:22 PM |
edit | Sandblasting Cabinet (large) | all |
What are our rules about member supplied abrasive? What do we allow? Do special cleanup rules apply? | 2024-09-24 5:44:22 PM |
edit | Sandblasting Cabinet (large) | all |
What are the rules, processes and costing around those? | 2024-09-24 5:44:22 PM |
edit | Sandblasting Cabinet (large) | all |
What is our process or housekeping around replacing media? | 2024-09-24 5:44:22 PM |
edit | Sandblasting Cabinet (large) | all | Chances are replacement screen is cheaper if we buy it by the roll. We can store it in the design space and cut of a piece when needed. Tina will look into. | 2024-09-24 5:44:22 PM |
edit | Sandblasting Cabinet (large) | all | I am pretty sure we have one... but where is it, and how would we ever use it safely. maybe we shouldn't have it? | 2024-09-24 5:44:22 PM |
edit | Sandblasting Cabinet (small) | all |
How about the small one? Do we have a default material for that? | 2024-09-24 5:44:20 PM |
edit | Sandblasting Cabinet (small) | all |
What are our rules about member supplied abrasive? What do we allow? Do special cleanup rules apply? | 2024-09-24 5:44:20 PM |
edit | Sandblasting Cabinet (small) | all |
What are the rules, processes and costing around those? | 2024-09-24 5:44:20 PM |
edit | Sandblasting Cabinet (small) | all |
What is our process or housekeping around replacing media? | 2024-09-24 5:44:20 PM |
edit | Sandblasting Cabinet (small) | all | Chances are replacement screen is cheaper if we buy it by the roll. We can store it in the design space and cut of a piece when needed. Tina will look into. | 2024-09-24 5:44:20 PM |
edit | Sandblasting Cabinet (small) | all | I am pretty sure we have one... but where is it, and how would we ever use it safely. maybe we shouldn't have it? | 2024-09-24 5:44:20 PM |
edit | Sawstop Industrial Cabinet Saw | all | Do we have a splitter? If not, remove? | 2024-09-02 4:51:55 AM |
edit | Sawstop Industrial Cabinet Saw | all | Want to improve this page? Here are some instructions you can add:
- How and when to use safety devices (featherboards, push sticks)
- How and when to use North Forge's sleds and fixtures
- What types of blades are suitable for different jobs
We also need photos:
- Blade change procedure
- Photo of SawStop indicator lights
- Sawstop Override key
| 2024-09-02 4:51:55 AM |
edit | SDS Binder | all | Marney, John Safety
Where are these? If we have several we should probably make a page for each so they can list and locate separately. It says one is in the 3D Printing Room, where are the others?
- I believe we only have one binder for the FormLabs resins in the 3DP room. Other hazards throughout the shop are located on northforge.ca/safety. Mstapley (talk)
- Is there a reason for that inconsistency? Ttenbergen (talk) 20:49, 2024 October 16 (CDT)
- Triple-check the binder in the 3D print room, I am actually not confident that it contains SWP...
| 2024-10-18 12:20:55 AM |
edit | Security at the Fablab | all |
needs fleshing out | 2024-10-14 5:04:50 AM |
edit | Server Room | all | Marney
you remove the question about confined space with a comment that it is part of confined space. If it is part of that, we should link to it from here. The old policy doesn't mention it, but when we move that to the wiki it would be easy to add it. | 2024-09-16 8:25:22 PM |
edit | Sharps Disposal Station | all | See Eye Wash Station. | 2024-10-08 8:17:12 PM |
edit | ShopBot 3-Axis CNC Mill | all | Safety1
Flagging as contentious safety concern. | 2024-10-18 1:24:17 PM |
edit | ShopBot 3-Axis CNC Mill | all | Want to make this page better? Edit it yourself, or talk to John Hache. North Forge would like to make sure instructions are clear and easy to use. | 2024-10-18 1:24:17 PM |
edit | ShopBot 5-Axis CNC Mill | all | Safety1
Flagging as contentious safety concern. | 2024-10-18 4:40:39 AM |
edit | Skedda | all | Marney
How is it set? What do the north forge and maintenance tags mean? | 2024-09-14 5:27:09 AM |
edit | Slack | all | Marney
Which are the default channels a new member is subscribed to? | 2024-09-14 5:36:26 AM |
edit | Small Tumbler | all |
- What are the rules, processes and costing around those?
| 2024-09-24 5:50:58 PM |
edit | Soldering workstation | all |
this might be best off if it becomes, or at least gets, its own Category:Multi tool template to add to each tool. Either containing all of this, or linking to this. Ttenbergen (talk) 22:35, 2024 September 7 (CDT) | 2024-09-08 3:35:51 AM |
edit | Soldering workstation | all |
what else
any specific other tools from IoT Innovation Lab? | 2024-09-08 3:35:51 AM |
edit | Soldering workstation | all | Second from right? | 2024-09-08 3:35:51 AM |
edit | Spindle Shaper with Sliding Table and Accurate Fence | all |
When will this be installed? | 2024-08-13 10:48:17 PM |
edit | Spindle Shaper with Sliding Table and Accurate Fence | all | Safety1
Flagging as contentious safety concern. | 2024-08-13 10:48:17 PM |
edit | Spot Welder | all | Jeff
Is there an outlet we can recommend or require for this, ideally one that would be open to a member re-set? | 2024-09-14 3:49:46 AM |
edit | Storage | all | Marney
We had talked about a limit to what members can store here, ie this is not storage facility where you can leave your household. Did we come up with details? No, see below for a suggestion | 2024-09-14 5:05:31 AM |
edit | Template:Abrasive media in the metalworking room | all |
- What are the rules, processes and costing around those?
| 2024-09-27 5:19:26 AM |
edit | Template:Do not run CNC tools unattended | all | Safety1
Flagging as contentious safety concern. | 2024-10-24 10:34:29 PM |
edit | Template:Flammables Cabinet | all | Marney
Do we have a policy. Is this consistent with that policy? We have a very brief policy in the safety manual; this page expands on it (adding information about WHMIS labelling). | 2024-09-14 4:12:35 AM |
edit | Template:Metal recycling | all | Edit in Template:Metal recycling
what does NF do with the scrap when we hear the bin is full? | 2024-10-08 8:26:27 PM |
edit | Template:Metal recycling | all | Edit in Template:Metal recycling
what to do if the bin is full. post on slack? Where? | 2024-10-08 8:26:27 PM |
edit | Template:Oily Rags Bins | all | When and how do we consider them dried enough, and who then puts the rags into the oily rag bin? | 2024-08-11 6:08:41 AM |
edit | Template:Sandblasting | all |
How about the small one? Do we have a default material for that? | 2024-09-24 6:02:48 PM |
edit | Template:Sandblasting | all |
What are our rules about member supplied abrasive? What do we allow? Do special cleanup rules apply? | 2024-09-24 6:02:48 PM |
edit | Template:Sandblasting | all |
What are the rules, processes and costing around those? | 2024-09-24 6:02:48 PM |
edit | Template:Sandblasting | all |
What is our process or housekeping around replacing media? | 2024-09-24 6:02:48 PM |
edit | Template:Sandblasting | all | Chances are replacement screen is cheaper if we buy it by the roll. We can store it in the design space and cut of a piece when needed. Tina will look into. | 2024-09-24 6:02:48 PM |
edit | Template:Sandblasting | all | I am pretty sure we have one... but where is it, and how would we ever use it safely. maybe we shouldn't have it? | 2024-09-24 6:02:48 PM |
edit | Template:Temporary storage | all | how should we deal with items that are there too long? This rule needs to be easy to enforce, if it is a hassle it won't get done. Can we just apply Storage#Consequences of inappropriate storage use? | 2024-08-14 3:53:16 AM |
edit | Template:Toe cap slip-ons | all |
do we have a spot where we cover the visitor rules for the use of these, and the exceptions? | 2024-10-15 5:36:18 PM |
edit | Temporary Large Sheet Storage | all | how should we deal with items that are there too long? This rule needs to be easy to enforce, if it is a hassle it won't get done. Can we just apply Storage#Consequences of inappropriate storage use? | 2024-08-11 4:24:40 AM |
edit | Temporary Large Sheet Storage | all | This could use a photo. | 2024-08-11 4:24:40 AM |
edit | Temporary Long Lumber Storage | all | how should we deal with items that are there too long? This rule needs to be easy to enforce, if it is a hassle it won't get done. Can we just apply Storage#Consequences of inappropriate storage use? | 2024-08-11 4:24:38 AM |
edit | Temporary Long Lumber Storage | all | This could use a photo. | 2024-08-11 4:24:38 AM |
edit | The Jail | all | This could use a photo. | 2024-08-11 8:09:26 PM |
edit | Thickness Planer | all | Safety1
Flagging as contentious safety concern. | 2024-10-14 4:21:22 PM |
edit | Todo | all | Some things that may not have a page to put questions yet are:
- check why headings don't expand in mobile view; this is kind of important because it makes must instructions inaccessible on phones. Might require changing the skin.
- Populate and add pages in PCs and Software, and add pages like Instructions:Aspire as appropriate
- any of the 3d printer slicers; that will make it easier for Brian to review which we still need. We should also list NF official alternate slicers, I think there are some installed on the 3dp computer. Who would know details?
- update template:Room to include a link to the relevant Slack channel, and populate that info for the rooms. Hm. Or would it make more sense to keep that info on the Slack page and just have the room pages query it? In any case, make a structure and populate...
- abrasive media for tumbler, waterjet and sandblasters. What do we have ,where is it stored, how is it charged for, which is appropriate for which tools.
- Sheet metal tools at the fablab
- laser room template for
- ventilation to apply to room and all lasers
- raster speed instruction
- dangerous materials, hazards etc as well;
- 3d resin safety template
- define table relationships like '"`UNIQ--nowiki-0000001B-QINU`"'
- figure out backup automation
- Add main photo for any equipment that doesn't have one
- Add useful photos or diagrams in instructions (showing details of various steps, locations of useful items/equipment features)
- Lifting stuff - I think we should have a page for that, and include the 2-ton Shop crane, Motorcycle lift outfeed table for the metal band saw and RapidLift Cart outfeed table for the sawstop as individual tools and options to lift stuff, but also include SWPs about lifting. There is a car jack in the tool room as well.
- homes for the pallet jacks
- PPE provided where, and how to re-fill
- talked with Marney today and she agreed it would be good to include most power tools in this, especially any with much risk or that are likely to be of interest to prospective members. Things like skill saws, anodizer, pipe notcher, fret saw...
- find out if there is an extension that allows easier addition of pictures
- make "discuss" and some other buttons easily available in the toolbar
- discuss visual editor with some users
- fix default signature in LocalSettings.php (see below, it breaks discuss)
| 2024-10-22 5:55:18 PM |
edit | Todo | all | Tina (put anything for me to prioritize here)
update the default search namesapces to all we use since the mobile skin doesn't show the portion where you can choose these. Ttenbergen (talk) 12:55, 2024 October 22 (CDT)
| 2024-10-22 5:55:18 PM |
edit | Toe cap bin (1st floor) | all |
do we have a spot where we cover the visitor rules for the use of these, and the exceptions? | 2024-10-15 4:54:04 PM |
edit | Toe cap shelf (3rd floor) | all |
do we have a spot where we cover the visitor rules for the use of these, and the exceptions? | 2024-10-15 4:53:41 PM |
edit | Tools test | all |
My friend Mark just joined. He asked me after his safety tour what tools he would be able to use between then and his first round of training sessions. I realized I didn't know if we have a formal answer for this. I told him the things in the tool room are probably fair game, so are a few other things, and to talk to someone beyond that.
Because I have been preaching wikis in general and the NF wiki in particular to him for years, he then made a wiki page So_You_Finished_Your_Safety_Orientation._Now_What?.
One of the things I would like to add is that, if a tool has no training session, you can ask the person listed as "trainer" or "knowledge keeper" and if they give you an intro, you are good to go. (But are they willing to do that?) Otherwise, if it has a SWP, you can use it if you read and follow the SWP. If a tool doesn't have a SWP, but its page on the wiki has a link to the manual, you can use the tool if you read the manual. And if there is no manual link, but you find a link to the manual and add it to the page then it becomes a page with a manual link and you can treat it so.
Would that be reasonable? My initial take was yes, but as I look at the results of that query on Tools_test I think we need to tweak this a little further. For example, just because someone finds a manual for the Fortus and adds the link we wouldn't want them to run that either. But we also don't want tools to be unattainable.
- Posted on the #safetycommittee channel on Slack. Ttenbergen (talk) 23:11, 2024 August 29 (CDT)
| 2024-10-02 7:26:51 PM |
edit | Training Validation | all |
I had situations where new members said they had used lasers before but because they were not Epilog I basically ended up doing the entire course for them in a slightly shortened form.
for returning members, it would usually be that they have to show the entire process with little to no intervention. This is something we should formalize once we have a better handle on things like the hazard analyses, training documentation, what does and does not require training, etc.
Lawrence made a document for his welding training.
<via slack> Be careful tho. Sometimes a so called proficiency check takes a lot longer than anticipated.
<via slack> One way to mitigate the uncertainties is to provide the trainee a list of tasks they should be able to perform and knowledge they should have, and sharing this beforehand | 2024-10-21 10:01:55 PM |
edit | Volunteer Night | all | details needed | 2024-09-09 8:41:49 PM |
edit | VPN PC | all | For now instructions are at https://northforge.ca/community/wp-content/uploads/2023/09/NorthForge-VPN-Connection-.pdf#new_tab - can we move those to the wiki? Are they up-to-date? | 2024-08-17 5:58:39 AM |
edit | WHMIS | all |
This is not official policy yet, but official policy will include similar information to this. | 2024-10-15 8:20:42 PM |
edit | WHMIS | all | I believe that items in household typical containers (e.g. bought in a consumer store) are exempted because they have the information on the container. Does someone have details or a citation for this? Yes, added information below Ttenbergen (talk) 23:36, 2024 August 13 (CDT) | 2024-10-15 8:20:42 PM |