Roland TrueVIS VG3-540 Printer

GeneralInstructions

Tools
Model	Roland TrueVIS VG3-540
Room	Design Space
Work envelope/max capacity	54" wide
Link to manual	https://365rolanddgnam.sharepoint.com/:b:/s/Dealers/ERi7Nka0BMhBjfHXSMejoJwBiAmNvFsmmXSszTsFIVFePw
Related tools	Heat Press Combo Heat Press Machine
Trainer(s)	Chris Brown
Training Sessions	Roland Printer Training
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)	.* cleaning liquid* ink
Safe Work Procedure
Consumables	North Forge provided and billed
Software	CorelDraw VersaWorks
Equipment type	tool

Expand Design Space Precautions apply

You will be working in the Design Space . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: don't put food in the garbage bins, there are mice we don't want to feed Several machines use vinyl; be careful when handling the rolls because you can damage them and in turn damage the sensitive vinyl equipment This space is partially open to the public - do not leave sharp objects lying around. We have some communal sharp tools in a secret place; ask a nearby helpful person or post on Slack if you would like to know where they are.

ExpandWhen would you use which specialty cutter or printer?

The Fablab has several specialty cutters/printers; where the capabilities overlap also see the Consumables list for cost differences: Roland TrueVIS VG3-540 Printer can print and cut decals, heat transfers and posters at amazing colour fidelity Graphtec FC8000-130 Vinyl Cutter can cut decal and heat transfer vinyl can be used with fluorescent, sparkly, retroreflective and other materials available as Consumables list HP DesignJet 800ps Large Format Printer can print large format images on paper; Consumables list supplied and charged Epson ET-2720 Sublimation Printer prints on special sublimation paper that allows to sublimate the ink right into the substrate, but can only be applied to some materials

• ink (usually from Polymershapes)
• ZEC-U5032 longer life Blade (ZEC-U5025 has half the life expectancy)
• tray pad
• wiper
• printer

edit these instructions at Instructions:Roland TrueVIS VG3-540 Printer

Do not use the Roland unless you have had Roland Printer Training. This is just a checklist.

Prep file

• open in CorelDraw
• set the vector that is the cut-out for the decal and backing to Contour cut
• set the vector that is the cut for the decal on top of the backing to Perf contour cut
• save as .pdf file with your name as part of the file name

Setting up roll of vinyl

• see details in instructions on the bucket
• make sure rollers are up
• push through media until 1 beep and then 2 beeps; fan should come on to hold it down
• lower rollers
• slide the side clamps onto the vinyl until the edge shows in the holes
• click "setup" button on screen on Roland
• click the material you are using (if not plain shiny vinyl, check the canonical instructions, wherever they are)
• it should say ready to print or something similar after that

Sending the print job

• open VersaWorks on the Roland PC
• drag the .pdf file into the file list on the left
• click the printer button
• the PC will take some time to process and print the file

Shut-down

• lift the rollers
• wind the vinyl back onto the roll

for all

Just a note from using it today. I could not find any instructions for it around to remind me of the details. Ttenbergen (talk) 23:18, 2024 October 27 (CDT)

• Cargo

• Categories