Instructions:Giant Blue Laser

for all	Photos: Raster table and vector grid, control panel icons

Startup[edit | edit source]

Turn the laser on using the key
Install the correct table for the operation type
1. Vector cut-through operations: use the vector grid
2. Raster operations: use the raster table
Install the correct lens for the operation type

Control Panel[edit | edit source]

Status indicator
Reset
Focus menu
- Things not to adjust
Pointer
Jog menu
Trace
Power and Speed
Job Menu
Settings Menu (do not touch)

Running a Job[edit | edit source]

Positioning[edit | edit source]

Camera Positioning[edit | edit source]

Positional Engraving[edit | edit source]

Process Settings[edit | edit source]

Focus and Home[edit | edit source]

Do not use auto-focus or manual focus from the Epilog Dashboard - North Forge maintenance staff have made adjustments to improve performance, and these options are no longer accurate. Ensure Auto-Focus is OFF in the Epilog Dashboard before proceeding and auto-focus using the control panel.

Lens and Mirror Cleaning[edit | edit source]

Lens Install[edit | edit source]

Shutdown[edit | edit source]