3D Printing Room

The 3D Printing Room is one of the rooms at North Forge.

Room precautions

edit at 3D Printing Room/Precautions

• In general, it's a good idea to watch your print until the first few layers are complete. 3D printing can be somewhat unreliable and prints often fail over the first few layers.
• SLA resin is very messy and poses several hazards that can accumulate over time. If you're working near the resin printers, do not touch your face or eyes and wash your hands afterwards.
• If you're working with the resin printers, wear protective nitrile gloves (available at the cleaning workstation). When pouring resin, wear goggles (with complete face seal) to avoid splashback injury.
• Wear safety glasses when removing snapaway supports.
• SDS are available in the SDS Binder near the door.
• Always label your filament rolls with your full name. Unlabelled rolls will be considered community use.
• Put finished prints in the finished prints bin.
• If you need to unload someone else's filament, please tuck in the ends to avoid tangling.

List of tools

The 3D Printing Room contains the following tools:

• Bambu Labs P1S FDM 3D Printer
• Bambu Labs P1S FDM 3D Printer with Automatic Material System (AMS)
• Bambu Labs X1 Carbon FDM 3D Printer
• Calibry 3D Scanner
• Creality Lizard Tabletop 3D Scanner
• Filament Connector
• Filament Warmer/Dryer
• Formlabs Form 2 Resin 3D Printer (DomineeringPig)
• Formlabs Form 2 Resin 3D Printer (LovingCosset)
• Formlabs Form 3 Resin 3D Printer (PastoralSalmon)
• FormLabs Form Wash and Form Cure
• Fortus Large Format FDM 3D Printer
• In-line Filament Dryer
• Lifebreath HRV (3DP)
• LulzBot Sidekick 3D Printer
• Plastic injection molding machine
• Prusa i3 MK3S+ FFF 3D printer
• Raise 3D Pro 3+ Hyper FFF

List of PCs

The 3D Printing Room contains the following PCs:

• 3d Print Room PC (software: Fusion360 • PreForm)

List of Training Sessions

The following Training Sessions are available for this room