3D Printing Room/Precautions
From North Forge
- In general. it's a good idea to watch your print until the first few layers are complete. 3D printing can be somewhat unreliable and prints often fail over the first few layers.
- SLA resin is very messy and poses several hazards that can accumulate over time. If you're working near the resin printers, do not touch your face or eyes and wash your hands afterwards.
- If you're working with the resin printers, wear protective nitrile gloves (available at the cleaning workstation). When pouring resin, wear goggles (with complete face seal) to avoid splashback injury.
- Wear safety glasses when removing snapaway supports.
- SDS are available in the binder near the door.
- Always label your filament rolls with your full name. Unlabelled rolls will be considered community use.
- Please put finished prints in the finished prints bin.
- If you need to unload someone else's filament, please tuck the ends to avoid tangling.
