| Tools | |
|---|---|
|
|
|
| Model | |
| Room | No room assigned |
| Work envelope/max capacity | |
| Link to manual | |
| Related tools | |
| Trainer(s) | |
| Training Sessions | no training sessions include this tool |
| Knowledge keeper(s) | |
| Training document(s) | |
| Material Safety Data Sheet (MSDS) | |
| Safe Work Procedure | |
| Consumables | |
| Software | this machine has no software listed |
| Equipment type | tool |
| Metall Working Room Precautions apply |
|
You will be working in the Metall Working Room . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: Metall Working Room/Precautions |
edit these instructions at Instructions:Spot Welder
The Spot Welder draws almost enough power to throw a breaker even during normal operation. If it heats up, it draws more, so don't exceed its duty cycle. If you do throw a breaker, make sure you post that on Slack in the broken channel immediately because it may affect other things on that circuit.
for all |
Jeff
|
Follow the manual, linked on the side.
