Spot Welder

Tools
Model
Room	No room assigned
Work envelope/max capacity
Link to manual
Related tools	;
Trainer(s)
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables
Software	this machine has no software listed
Equipment type	tool

Metall Working Room Precautions apply
You will be working in the Metall Working Room . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: Metall Working Room/Precautions

edit these instructions at Instructions:Spot Welder

The Spot Welder draws almost enough power to throw a breaker even during normal operation. If it heats up, it draws more, so don't exceed its duty cycle. If you do throw a breaker, make sure you post that on Slack in the broken channel immediately because it may affect other things on that circuit.

for all	Jeff Is there an outlet we can recommend or require for this, ideally one that would be open to a member re-set?

Follow the manual, linked on the side.