More actions
Whatever is discussed in here likely also applies to Fire Extinguisher.
North Forge supplies eye wash stations for use in case of eye irritation. If you use the eye wash station, please fill out an Incident Report Form.
Use
- Remove the lid
- If only one eye is affected, tilt your head so that the affected eye is lower. This prevents contaminants from being washed into the unaffected eye.
- Hold the bottle against your face over the eye and squeeze.
- While squeezing, move your eyeball around to access as much of the surface as possible.
- If necessary, also raise your eyelids using a finger to dislodge any contaminants under the eyeball.
Locations
1st Floor Design Space
- Beside the door leading to the metalworking area/back lane (to the left when facing the door)
- On the wall beside the main entrance door by the air tank (to the left when facing the door)
- On the wall to the right of the metal lathe
3rd Floor
- On the wall between the IoT Innovation Lab and the 3D printing room
- On the wall outside the tool room (to the right of the door)
- Inside Tiny Maker Mind workshop, on the wall opposite the door (member-owned space, do not enter except in case of emergency)
- To the right of the back elevator/directly across from the paint booth
- On the wall directly beside the main entrance (to the left when facing the door)
- On the wall directly beside the door (to the right when fcing the door)
- On the wall directly beside the door (to the right when facing the door)
- On the wall directly beside the door (to the right when facing the door
- On the wall directly beside the door (to the right when facing the door)
- Inside the room on the wall directly beside the door (to the right when facing the door).
- Inside the room on the wall beside the door (to the left when facing the door).