Spot Welder

GeneralInstructions

Tools
Model	PowerFist 110 Volt Spot Welder SKU: 8784662
Room	Metalworking Room
Work envelope/max capacity
Link to manual	https://www.princessauto.com/file/general/8784662_manualhb_00_01_v01.pdf
Related tools
Trainer(s)
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables
Software	this machine has no software listed
Equipment type	tool

Expand Metalworking Room Precautions apply

You will be working in the Metalworking Room . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: Housekeeping Dispose of scrap metal in the Metal recycling bin (metal room)

The Spot Welder lives in the cabinet across from the Sandblasting Cabinet (s) x2.

edit these instructions at Instructions:Spot Welder

The Spot Welder draws almost enough power to throw a breaker even during normal operation. If it heats up, it draws more, so don't exceed its duty cycle. If you do throw a breaker, make sure you post that on Slack in the broken channel immediately because it may affect other things on that circuit.

for all

Jeff Is there an outlet we can recommend or require for this, ideally one that would be open to a member re-set?

• Cargo

• Categories

Follow the manual, linked on the side.