Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

3D Printing Room/Precautions: Difference between revisions

From North Forge
m Ttenbergen moved page 3D Printing Room\Precautions to 3D Printing Room/Precautions without leaving a redirect: Text replacement - "Room\" to "Room/"
General precautions and rules added.
Line 1: Line 1:
* printer resin is on stuff, watch what you touch and wash your hands after; resin is a serious eye irritant
* SLA resin poses several hazards that can accumulate over time. If you're working near the resin printers, do not touch your face or eyes and wash your hands afterwards.
* If you're working with the resin printers, wear protective gloves (available at the cleaning workstation). When pouring resin, wear goggles (with complete face seal) to avoid splashback injury.
* Wear safety glasses when removing snapaway supports.
* SDS are available in the binder near the door.
* Always label your filament rolls with your full name. Unlabelled rolls will be considered community use.
* Please put finished prints in the finished prints bin.
* If you need to unload someone else's filament, please tuck the ends to avoid tangling.

Revision as of 07:38, 2024 June 13

  • SLA resin poses several hazards that can accumulate over time. If you're working near the resin printers, do not touch your face or eyes and wash your hands afterwards.
  • If you're working with the resin printers, wear protective gloves (available at the cleaning workstation). When pouring resin, wear goggles (with complete face seal) to avoid splashback injury.
  • Wear safety glasses when removing snapaway supports.
  • SDS are available in the binder near the door.
  • Always label your filament rolls with your full name. Unlabelled rolls will be considered community use.
  • Please put finished prints in the finished prints bin.
  • If you need to unload someone else's filament, please tuck the ends to avoid tangling.