Filament Connector: Difference between revisions

Tools
Model	SUNLU Filament Connector
Room	3D Printing Room
Work envelope/max capacity	1.75 mm
Link to manual	https://www.youtube.com/watch?v=MsAYNpk-upc&t=18s
Related tools	;
Trainer(s)
Training Sessions	no training sessions include this tool
Knowledge keeper(s)	Marney Stapley
Training document(s)	google doc
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables	NF provided teflon tubes. Post on consummables slack channel when we need more.
Software	this machine has no software listed
Equipment type	tool

Latest revision as of 08:37, 2024 August 23

3D Printing Room Precautions apply
You will be working in the 3D Printing Room . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: In general, it's a good idea to watch your print until the first few layers are complete. 3D printing can be somewhat unreliable and prints often fail over the first few layers. SLA resin is very messy and poses several hazards that can accumulate over time. If you're working near the resin printers, do not touch your face or eyes and wash your hands afterwards. If you're working with the resin printers, wear protective nitrile gloves (available at the cleaning workstation). When pouring resin, wear goggles (with complete face seal) to avoid splashback injury. Wear safety glasses when removing snapaway supports. SDS are available in the SDS Binder near the door. Always label your filament rolls with your full name. Unlabelled rolls will be considered community use. Put finished prints in the finished prints bin. If you need to unload someone else's filament, please tuck in the ends to avoid tangling.

On the shelf, by the door.

@@ Line 1: / Line 1: @@
 {{Tool
-|photo=P1S.jpg
+|photo=Filament Connector.jpg
 |room=3D Printing Room
-|model=Bambu Labs P1S
+|model=SUNLU Filament Connector
-|work envelope=256 x 256 x 256 mm (10.08 x 10.08 x 10.08 in)
+|work envelope=1.75 mm
-|link to manual=https://wiki.bambulab.com/en/p1/manual
+|link to manual=https://www.youtube.com/watch?v=MsAYNpk-upc&t=18s
-|trainers=Richard Venzon
+|knowledge keepers=Marney Stapley
-|consumables=North Forge filament available for free (small jobs only). NF filament is labelled and stored in the bin with the red lid by the door.
+|training docs=[https://docs.google.com/document/d/1IfPnZW6az6uDTthw7OmgZivzbRtC1CxG/edit google doc]
-|other details=
+|consumables=NF provided teflon tubes. Post on consummables [[slack]] channel when we need more.
-The Bambu Labs P1S is a general-purpose, high-speed FDM 3D printer. It is used to 3D print objects using common 3D printing filament.
+|other details=On the shelf, by the door.
 }}