More actions
Combined display of all available logs of North Forge. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 14:04, 2024 October 18 Mpatryluk talk contribs created page File:ProtoFlowS-Panel.jpg (View of the control panel and display of the LPKF ProtoFlow S. Up and down arrows navigate the menu, right arrow selects, left arrow goes back.)
- 14:04, 2024 October 18 Mpatryluk talk contribs uploaded File:ProtoFlowS-Panel.jpg (View of the control panel and display of the LPKF ProtoFlow S. Up and down arrows navigate the menu, right arrow selects, left arrow goes back.)
- 14:04, 2024 October 18 Mpatryluk talk contribs created page File:ProtoFlowS-Open.jpg (View of the KPKF ProtoFlow S reflow oven with the door open. Note the three PCB holders that slide on the rails. Also visible are the cooling fans.)
- 14:04, 2024 October 18 Mpatryluk talk contribs uploaded File:ProtoFlowS-Open.jpg (View of the KPKF ProtoFlow S reflow oven with the door open. Note the three PCB holders that slide on the rails. Also visible are the cooling fans.)
- 14:02, 2024 October 18 Mpatryluk talk contribs created page File:ProtoFlowS-Front.jpg (Front view of the LPKF ProtoFlow S. Power button is circular grey button at bottom right (next to USB port). Door is in the middle of the front panel (includes the glass panel). Control panel is at top right (includes the display, glowing blue).)
- 14:02, 2024 October 18 Mpatryluk talk contribs uploaded File:ProtoFlowS-Front.jpg (Front view of the LPKF ProtoFlow S. Power button is circular grey button at bottom right (next to USB port). Door is in the middle of the front panel (includes the glass panel). Control panel is at top right (includes the display, glowing blue).)
- 16:30, 2024 September 25 Mpatryluk talk contribs created page File:IoT - LPKF ProtoFlow S - Reflow Soldering Oven.JPG (LPKF ProtoFlow S Reflow Oven for soldering. Located on the 3rd floor in the IoT room.)
- 16:30, 2024 September 25 Mpatryluk talk contribs uploaded File:IoT - LPKF ProtoFlow S - Reflow Soldering Oven.JPG (LPKF ProtoFlow S Reflow Oven for soldering. Located on the 3rd floor in the IoT room.)
- 16:23, 2024 September 25 Mpatryluk talk contribs deleted page Weller WR 3M (soldering system) (content was: "{{Tool |photo=IoT_-_Weller_WR3M_-_Solder_Rework_Station.png |room=IoT Innovation Lab |model=Weller WR3M |link to manual=[https://www.weller-tools.com/sites/default/files/products/documents/WEL_WR2_WR3M_Manual_T0055705511_web.pdf manual] |trainers=No Training Available |consumables=Solder, filters, suction cups for pickup tool |other details=Burn / fire / lead / chemical risk. |equipment_type=tool }}")
- 23:16, 2024 September 22 Mpatryluk talk contribs created page Hakko FA-430 Fume Extractor (Page creation)
- 14:23, 2024 September 11 Mpatryluk talk contribs created page Instructions:Conventional Drill Press (Page Creation) Tag: Visual edit
- 23:55, 2024 September 6 Mpatryluk talk contribs created page File:IoT - GW GOS-622G Oscilloscope.png (GOS-622G analog oscilloscope. Rated for 20MHz. Located in IoT Room on 3rd floor.)
- 23:55, 2024 September 6 Mpatryluk talk contribs uploaded File:IoT - GW GOS-622G Oscilloscope.png (GOS-622G analog oscilloscope. Rated for 20MHz. Located in IoT Room on 3rd floor.)
- 22:22, 2024 September 3 Mpatryluk talk contribs created page File:3D Printing Room - Formlabs Form2 Resin Printer.png (Two Formlabs Form2 Resin printers. Loving Cosset on the left, Domineering Pig on the right. Both located in the 3D Printing Room on the 1st floor.)
- 22:22, 2024 September 3 Mpatryluk talk contribs uploaded File:3D Printing Room - Formlabs Form2 Resin Printer.png (Two Formlabs Form2 Resin printers. Loving Cosset on the left, Domineering Pig on the right. Both located in the 3D Printing Room on the 1st floor.)
- 22:17, 2024 September 3 Mpatryluk talk contribs created page File:Metal Room - English Wheel.png (The English Wheel, located in the Metalworking room on the 1st floor.)
- 22:17, 2024 September 3 Mpatryluk talk contribs uploaded File:Metal Room - English Wheel.png (The English Wheel, located in the Metalworking room on the 1st floor.)
- 22:14, 2024 September 3 Mpatryluk talk contribs created page File:3D Printing Room - Prusa i3 MK3.png (Prusa i3 MK3 3D (FDM) printer, located in the 3D Printing Room on the 3rd floor.)
- 22:14, 2024 September 3 Mpatryluk talk contribs uploaded File:3D Printing Room - Prusa i3 MK3.png (Prusa i3 MK3 3D (FDM) printer, located in the 3D Printing Room on the 3rd floor.)
- 22:09, 2024 September 3 Mpatryluk talk contribs created page File:EcoPoxy Room.png (The EcoPoxy Room, showing work table, some of the tools and consumables, and the Renishaw 5/01 vacuum casting machine)
- 22:09, 2024 September 3 Mpatryluk talk contribs uploaded File:EcoPoxy Room.png (The EcoPoxy Room, showing work table, some of the tools and consumables, and the Renishaw 5/01 vacuum casting machine)
- 22:04, 2024 September 3 Mpatryluk talk contribs created page File:Woodworking Room - Safety Speed Manufacturing Wide Belt Sander.png (Safety Speed Manufacturing Model 3760 wide-belt sander. Located in the Woodworking Room on the 3rd floor.)
- 22:04, 2024 September 3 Mpatryluk talk contribs uploaded File:Woodworking Room - Safety Speed Manufacturing Wide Belt Sander.png (Safety Speed Manufacturing Model 3760 wide-belt sander. Located in the Woodworking Room on the 3rd floor.)
- 21:58, 2024 September 3 Mpatryluk talk contribs created page Vulcan Anvil (Page Creation)
- 21:56, 2024 September 3 Mpatryluk talk contribs created page File:Metal Room - Vulcan Anvil.png (Vulcan-brand Anvil. Located in the Metal Room on the 1st floor.)
- 21:56, 2024 September 3 Mpatryluk talk contribs uploaded File:Metal Room - Vulcan Anvil.png (Vulcan-brand Anvil. Located in the Metal Room on the 1st floor.)
- 21:41, 2024 September 3 Mpatryluk talk contribs created page File:Laser Room - Universal ILS 12.5 AKA Big Red.png (The Universal Laser System ILS 12.5, colloquially known as "Big Red". Located on the 3rd floor in the Laser Room.)
- 21:41, 2024 September 3 Mpatryluk talk contribs uploaded File:Laser Room - Universal ILS 12.5 AKA Big Red.png (The Universal Laser System ILS 12.5, colloquially known as "Big Red". Located on the 3rd floor in the Laser Room.)
- 21:36, 2024 September 3 Mpatryluk talk contribs created page File:Elevator.png (View of elevator with outer (wood) and inner (steel) closed.)
- 21:36, 2024 September 3 Mpatryluk talk contribs uploaded File:Elevator.png (View of elevator with outer (wood) and inner (steel) closed.)
- 00:55, 2024 September 1 Mpatryluk talk contribs created page File:Design Space - Brother JX1710 Sewing Machine.png (Brother JX1710 consumer-grade sewing machine. Located in the Design Space on the 1st floor.)
- 00:55, 2024 September 1 Mpatryluk talk contribs uploaded File:Design Space - Brother JX1710 Sewing Machine.png (Brother JX1710 consumer-grade sewing machine. Located in the Design Space on the 1st floor.)
- 00:50, 2024 September 1 Mpatryluk talk contribs created page File:Design Space - Roland TrueVIS VG3-540 Printer.png (The Roland TrueVIS VG3-540 large format, high-gamut, high-resolution banner printer. Located in the Design Space on the 1st floor.)
- 00:50, 2024 September 1 Mpatryluk talk contribs uploaded File:Design Space - Roland TrueVIS VG3-540 Printer.png (The Roland TrueVIS VG3-540 large format, high-gamut, high-resolution banner printer. Located in the Design Space on the 1st floor.)
- 00:46, 2024 September 1 Mpatryluk talk contribs created page File:Design Space - Double Robotics Telepresence Robot.png (Double Robotics Telepresence Robot (aka McRoboFace). Located in the Design Space on the 1st floor... when it's not out wandering around.)
- 00:46, 2024 September 1 Mpatryluk talk contribs uploaded File:Design Space - Double Robotics Telepresence Robot.png (Double Robotics Telepresence Robot (aka McRoboFace). Located in the Design Space on the 1st floor... when it's not out wandering around.)
- 00:41, 2024 September 1 Mpatryluk talk contribs created page File:Design Space - PFAFF Sewing Machine and Table.png (PFAFF sewing machine and table with multiple thread spool arm. Located in the Design Space on the 1st floor.)
- 00:41, 2024 September 1 Mpatryluk talk contribs uploaded File:Design Space - PFAFF Sewing Machine and Table.png (PFAFF sewing machine and table with multiple thread spool arm. Located in the Design Space on the 1st floor.)
- 00:35, 2024 September 1 Mpatryluk talk contribs created page File:Design Space - Combo Heat Press Machine.png (Small curved heat press machine suitable for HTV on surfaces like cap bills or shirt sleeves. Located in Design Space on 1st floor.)
- 00:35, 2024 September 1 Mpatryluk talk contribs uploaded File:Design Space - Combo Heat Press Machine.png (Small curved heat press machine suitable for HTV on surfaces like cap bills or shirt sleeves. Located in Design Space on 1st floor.)
- 00:32, 2024 September 1 Mpatryluk talk contribs created page Combo Heat Press Machine (Page Creation)
- 00:25, 2024 September 1 Mpatryluk talk contribs created page SD-360U SMT stencil printer (Page Creation)
- 00:24, 2024 September 1 Mpatryluk talk contribs created page File:IoT - SD-360U - SMD Stencil Printer.PNG (SD-360U SMD Stencil Printer, for applying solder paste to boards with solder stencils. Located in the IoT Innovation Lab on the 3rd floor.)
- 00:24, 2024 September 1 Mpatryluk talk contribs uploaded File:IoT - SD-360U - SMD Stencil Printer.PNG (SD-360U SMD Stencil Printer, for applying solder paste to boards with solder stencils. Located in the IoT Innovation Lab on the 3rd floor.)
- 00:01, 2024 September 1 Mpatryluk talk contribs created page File:IoT - Weller WR3M - Solder Rework Station.png (Weller WR3M Solder Rework Station, located in the IoT room on the 3rd floor.)
- 00:01, 2024 September 1 Mpatryluk talk contribs uploaded File:IoT - Weller WR3M - Solder Rework Station.png (Weller WR3M Solder Rework Station, located in the IoT room on the 3rd floor.)
- 23:54, 2024 August 31 Mpatryluk talk contribs created page File:Design Space - HP DesignJet 800ps - Large Format Printer.png (HP DesignJet 800ps Large Format printer, located in the Design Space on the 1st floor.)
- 23:54, 2024 August 31 Mpatryluk talk contribs uploaded File:Design Space - HP DesignJet 800ps - Large Format Printer.png (HP DesignJet 800ps Large Format printer, located in the Design Space on the 1st floor.)
- 23:49, 2024 August 31 Mpatryluk talk contribs deleted page File:Design Space - HP DesignJet 800ps - Large Format Printer.JPG (content was: "== Summary == The HP DesignJet 800ps located in the Design Space on the 1st floor.", and the only contributor was "Mpatryluk" (talk))
- 23:40, 2024 August 31 Mpatryluk talk contribs created page File:Design Space - HP DesignJet 800ps - Large Format Printer.JPG (The HP DesignJet 800ps located in the Design Space on the 1st floor.)
- 23:40, 2024 August 31 Mpatryluk talk contribs uploaded File:Design Space - HP DesignJet 800ps - Large Format Printer.JPG (The HP DesignJet 800ps located in the Design Space on the 1st floor.)
- 01:14, 2024 August 28 Mpatryluk talk contribs created page File:Fancierstudio Power Heat Press 15x15A.png (Fancierstudio Power Heat Press 15x15A for t-shirts, heat-transfer vinyl (HVT) and sublimation. Protective gloves, teflon pads, parchment paper, and heat/timing setting charts are to the right of the machine. Note the clamp beneath the front of the machine (steel bar pointing toward floor, part of wood handle showing). Clamp must be secure and holding the press securely against the table before using the press.)
- 01:14, 2024 August 28 Mpatryluk talk contribs uploaded File:Fancierstudio Power Heat Press 15x15A.png (Fancierstudio Power Heat Press 15x15A for t-shirts, heat-transfer vinyl (HVT) and sublimation. Protective gloves, teflon pads, parchment paper, and heat/timing setting charts are to the right of the machine. Note the clamp beneath the front of the machine (steel bar pointing toward floor, part of wood handle showing). Clamp must be secure and holding the press securely against the table before using the press.)
- 01:03, 2024 August 28 Mpatryluk talk contribs created page So You Finished Your Safety Orientation. Now What? (Created page with "== WORK IN PROGRESS == So, you're a new member and you just finished your Safety Orientation. Welcome! But now you're standing there with all this equipment and material around you and no idea what you can do right at this moment. The good news is that there are a few things you ''should'' do, and a few things you ''can'' do. '''What You Should Do''' * Introduce yourself on Slack and explore/subscribe to the channels that interest you. Some useful ones are: ** 125-tr...")
- 00:14, 2024 August 28 Mpatryluk talk contribs created page File:Graphtec Vinyl Cutter.png (Image of the Graphtec Vinyl Cutter, note control panel at top right. The PC to control this machine is directly to the right of the Graphtec. Heat-transfer vinyl rolls is to the left (near the green bench in this photo), regular vinyl rolls are to the right, along the wall behind the grey curtains.)
- 00:14, 2024 August 28 Mpatryluk talk contribs uploaded File:Graphtec Vinyl Cutter.png (Image of the Graphtec Vinyl Cutter, note control panel at top right. The PC to control this machine is directly to the right of the Graphtec. Heat-transfer vinyl rolls is to the left (near the green bench in this photo), regular vinyl rolls are to the right, along the wall behind the grey curtains.)
- 11:39, 2023 May 19 Mpatryluk talk contribs created page File:3oi8cfocoqxmnuce4.jpg
- 11:39, 2023 May 19 Mpatryluk talk contribs uploaded File:3oi8cfocoqxmnuce4.jpg
- 10:32, 2023 May 19 Mpatryluk talk contribs created page Test orphan page (Created page with "This is just a test orphan page to test adding to collections, etc. thumb|alt=This is alternative text for a squirrel|This is a squirrel")
- 10:31, 2023 May 19 Mpatryluk talk contribs created page File:Squirrel.jpg
- 10:31, 2023 May 19 Mpatryluk talk contribs uploaded File:Squirrel.jpg
- 10:09, 2023 May 19 Mpatryluk talk contribs created page Test Collection SL (Just a test)
