More actions
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 14:04, 2024 October 18 | ProtoFlowS-Panel.jpg (file) |  |
2.16 MB | Mpatryluk | View of the control panel and display of the LPKF ProtoFlow S. Up and down arrows navigate the menu, right arrow selects, left arrow goes back. | 1 |
| 14:04, 2024 October 18 | ProtoFlowS-Open.jpg (file) |  |
3.6 MB | Mpatryluk | View of the KPKF ProtoFlow S reflow oven with the door open. Note the three PCB holders that slide on the rails. Also visible are the cooling fans. | 1 |
| 14:02, 2024 October 18 | ProtoFlowS-Front.jpg (file) |  |
2.75 MB | Mpatryluk | Front view of the LPKF ProtoFlow S. Power button is circular grey button at bottom right (next to USB port). Door is in the middle of the front panel (includes the glass panel). Control panel is at top right (includes the display, glowing blue). | 1 |
| 16:30, 2024 September 25 | IoT - LPKF ProtoFlow S - Reflow Soldering Oven.JPG (file) |  |
3.74 MB | Mpatryluk | LPKF ProtoFlow S Reflow Oven for soldering. Located on the 3rd floor in the IoT room. | 1 |
| 14:54, 2024 September 17 | Ultrasonic Cleaner (IoT small).jpg (file) | .jpg) |
500 KB | Ttenbergen | 1 | |
| 14:52, 2024 September 17 | Ultrasonic Cleaner (IoT large).jpg (file) | .jpg) |
2.4 MB | Ttenbergen | 1 | |
| 14:51, 2024 September 17 | Soldering fume extractor (small spare) Weller WSA350.jpg (file) | _Weller_WSA350.jpg) |
2.33 MB | Ttenbergen | 1 | |
| 12:33, 2024 September 13 | Pipe notcher.jpg (file) |  |
1.09 MB | Ttenbergen | 1 | |
| 10:21, 2024 September 13 | Vacuum drywall sanding kit.jpg (file) |  |
2.73 MB | Ttenbergen | 1 | |
| 10:20, 2024 September 13 | Sheet metal flanging tool.jpg (file) |  |
920 KB | Ttenbergen | 1 | |
| 10:20, 2024 September 13 | Handheld power metal cutting shear.jpg (file) |  |
1.04 MB | Ttenbergen | 1 | |
| 10:17, 2024 September 13 | Tormach Mini Lathe.jpg (file) |  |
2.44 MB | Ttenbergen | 1 | |
| 21:39, 2024 September 7 | Hakko FA-430 soldering fume extractor.jpg (file) |  |
563 KB | Ttenbergen | Image of Soldering fume extractor. | 1 |
| 23:55, 2024 September 6 | IoT - GW GOS-622G Oscilloscope.png (file) |  |
913 KB | Mpatryluk | GOS-622G analog oscilloscope. Rated for 20MHz. Located in IoT Room on 3rd floor. | 1 |
| 22:22, 2024 September 3 | 3D Printing Room - Formlabs Form2 Resin Printer.png (file) |  |
3.28 MB | Mpatryluk | Two Formlabs Form2 Resin printers. Loving Cosset on the left, Domineering Pig on the right. Both located in the 3D Printing Room on the 1st floor. | 1 |
| 22:17, 2024 September 3 | Metal Room - English Wheel.png (file) |  |
3.28 MB | Mpatryluk | The English Wheel, located in the Metalworking room on the 1st floor. | 1 |
| 22:14, 2024 September 3 | 3D Printing Room - Prusa i3 MK3.png (file) |  |
3.99 MB | Mpatryluk | Prusa i3 MK3 3D (FDM) printer, located in the 3D Printing Room on the 3rd floor. | 1 |
| 22:09, 2024 September 3 | EcoPoxy Room.png (file) |  |
3.22 MB | Mpatryluk | The EcoPoxy Room, showing work table, some of the tools and consumables, and the Renishaw 5/01 vacuum casting machine | 1 |
| 22:04, 2024 September 3 | Woodworking Room - Safety Speed Manufacturing Wide Belt Sander.png (file) |  |
3.61 MB | Mpatryluk | Safety Speed Manufacturing Model 3760 wide-belt sander. Located in the Woodworking Room on the 3rd floor. | 1 |
| 21:56, 2024 September 3 | Metal Room - Vulcan Anvil.png (file) |  |
3.3 MB | Mpatryluk | Vulcan-brand Anvil. Located in the Metal Room on the 1st floor. | 1 |
| 21:41, 2024 September 3 | Laser Room - Universal ILS 12.5 AKA Big Red.png (file) |  |
3.41 MB | Mpatryluk | The Universal Laser System ILS 12.5, colloquially known as "Big Red". Located on the 3rd floor in the Laser Room. | 1 |
| 21:36, 2024 September 3 | Elevator.png (file) |  |
4.03 MB | Mpatryluk | View of elevator with outer (wood) and inner (steel) closed. | 1 |
| 21:40, 2024 September 1 | Back door monitor.jpg (file) |  |
413 KB | Ttenbergen | 1 | |
| 21:36, 2024 September 1 | Wide Belt Sander Eraser.jpg (file) |  |
3.8 MB | Ttenbergen | Relevant to Wide Belt Sander | 1 |
| 00:55, 2024 September 1 | Design Space - Brother JX1710 Sewing Machine.png (file) |  |
2.95 MB | Mpatryluk | Brother JX1710 consumer-grade sewing machine. Located in the Design Space on the 1st floor. | 1 |
| 00:50, 2024 September 1 | Design Space - Roland TrueVIS VG3-540 Printer.png (file) |  |
3.63 MB | Mpatryluk | The Roland TrueVIS VG3-540 large format, high-gamut, high-resolution banner printer. Located in the Design Space on the 1st floor. | 1 |
| 00:46, 2024 September 1 | Design Space - Double Robotics Telepresence Robot.png (file) |  |
3.33 MB | Mpatryluk | Double Robotics Telepresence Robot (aka McRoboFace). Located in the Design Space on the 1st floor... when it's not out wandering around. | 1 |
| 00:41, 2024 September 1 | Design Space - PFAFF Sewing Machine and Table.png (file) |  |
3.63 MB | Mpatryluk | PFAFF sewing machine and table with multiple thread spool arm. Located in the Design Space on the 1st floor. | 1 |
| 00:35, 2024 September 1 | Design Space - Combo Heat Press Machine.png (file) |  |
3.51 MB | Mpatryluk | Small curved heat press machine suitable for HTV on surfaces like cap bills or shirt sleeves. Located in Design Space on 1st floor. | 1 |
| 00:24, 2024 September 1 | IoT - SD-360U - SMD Stencil Printer.PNG (file) |  |
3.29 MB | Mpatryluk | SD-360U SMD Stencil Printer, for applying solder paste to boards with solder stencils. Located in the IoT Innovation Lab on the 3rd floor. | 1 |
| 00:01, 2024 September 1 | IoT - Weller WR3M - Solder Rework Station.png (file) |  |
3.3 MB | Mpatryluk | Weller WR3M Solder Rework Station, located in the IoT room on the 3rd floor. | 1 |
| 23:54, 2024 August 31 | Design Space - HP DesignJet 800ps - Large Format Printer.png (file) |  |
3.17 MB | Mpatryluk | HP DesignJet 800ps Large Format printer, located in the Design Space on the 1st floor. | 1 |
| 01:14, 2024 August 28 | Fancierstudio Power Heat Press 15x15A.png (file) |  |
4.19 MB | Mpatryluk | Fancierstudio Power Heat Press 15x15A for t-shirts, heat-transfer vinyl (HVT) and sublimation. Protective gloves, teflon pads, parchment paper, and heat/timing setting charts are to the right of the machine. Note the clamp beneath the front of the machine (steel bar pointing toward floor, part of wood handle showing). Clamp must be secure and holding the press securely against the table before using the press. | 1 |
| 00:14, 2024 August 28 | Graphtec Vinyl Cutter.png (file) |  |
4.12 MB | Mpatryluk | Image of the Graphtec Vinyl Cutter, note control panel at top right. The PC to control this machine is directly to the right of the Graphtec. Heat-transfer vinyl rolls is to the left (near the green bench in this photo), regular vinyl rolls are to the right, along the wall behind the grey curtains. | 1 |
| 08:35, 2024 August 23 | Filament Connector.jpg (file) |  |
1.08 MB | Mstapley | 1 | |
| 15:58, 2024 August 19 | Drum Polisher.jpg (file) |  |
994 KB | Ttenbergen | 1 | |
| 20:01, 2024 August 15 | 1st Floor Plan.png (file) |  |
382 KB | Ttenbergen | For NF Map Demo. | 1 |
| 10:17, 2024 August 13 | CNC Spoilboard Storage.jpg (file) |  |
2.95 MB | Ttenbergen | 1 | |
| 10:04, 2024 July 23 | Belt sander giant.jpg (file) |  |
1.84 MB | Ttenbergen | 1 | |
| 09:12, 2024 July 23 | Metal band saw.jpg (file) |  |
1.61 MB | Ttenbergen | 1 | |
| 14:49, 2024 July 11 | HelixPower.jpg (file) |  |
681 KB | John Hache | Helix power switch | 1 |
| 14:48, 2024 July 11 | FusionFocus.jpg (file) |  |
4.11 MB | John Hache | Focusing the Fusion laser | 1 |
| 08:01, 2024 July 11 | Lasersettingsgearicon.jpg (file) |  |
628 KB | John Hache | Gear icon for opening laser settings | 1 |
| 08:00, 2024 July 11 | Laserpiecepagesize.jpg (file) |  |
2.12 MB | John Hache | Ensuring page size and piece size match in CorelDraw | 1 |
| 08:00, 2024 July 11 | CorelRed255.jpg (file) |  |
340 KB | John Hache | Setting red line colour in CorelDraw | 1 |
| 07:58, 2024 July 11 | Crosswithsupport.jpg (file) |  |
1.75 MB | John Hache | 3D printed cross with support | 1 |
| 07:58, 2024 July 11 | Crossnosupport.jpg (file) |  |
1.39 MB | John Hache | 3D printed cross shape with no support | 1 |
| 07:39, 2024 July 11 | HelixControlPanel.jpg (file) |  |
119 KB | John Hache | Helix control panel with legend | 1 |
| 18:54, 2024 July 8 | Discussion.gif (file) |  |
1 KB | Ttenbergen | 1 | |
| 10:03, 2024 July 6 | FusionLaserSettings.jpg (file) |  |
1.53 MB | John Hache | 1 | |
| 09:22, 2024 July 6 | FusionPanelUL.jpg (file) |  |
60 KB | John Hache | Fusion laser control panel (not labelled) | 1 |
| 09:22, 2024 July 6 | FusionPanel.jpg (file) |  |
113 KB | John Hache | Fusion Laser Control Panel | 1 |
| 14:18, 2024 July 1 | TableSawDangerZone.jpg (file) |  |
659 KB | John Hache | 1 | |
| 14:12, 2024 July 1 | Band Saw Tensioning V2a.jpg (file) |  |
1.17 MB | John Hache | 1 | |
| 14:11, 2024 July 1 | PushDirection.jpg (file) |  |
649 KB | John Hache | 1 | |
| 10:56, 2024 June 30 | ToolCrash.jpg (file) |  |
617 KB | John Hache | Improper tool stickout can cause a crash. | 1 |
| 11:19, 2024 June 28 | Zonemap.jpg (file) |  |
1.47 MB | John Hache | 1 | |
| 11:19, 2024 June 28 | RoomLayout.jpg (file) |  |
256 KB | John Hache | 1 | |
| 11:19, 2024 June 28 | Nftakeapart2.jpg (file) |  |
691 KB | John Hache | 1 | |
| 11:19, 2024 June 28 | Nftakeapart1.jpg (file) |  |
673 KB | John Hache | 1 | |
| 11:19, 2024 June 28 | Nf49exhaustoff.jpg (file) |  |
588 KB | John Hache | 1 | |
| 11:19, 2024 June 28 | Nf47airoff.jpg (file) |  |
602 KB | John Hache | 1 | |
| 11:18, 2024 June 28 | Nf46poweroff.jpg (file) |  |
611 KB | John Hache | 1 | |
| 11:18, 2024 June 28 | Nf45estop.jpg (file) |  |
770 KB | John Hache | 1 | |
| 11:18, 2024 June 28 | Nf43restblock.jpg (file) |  |
690 KB | John Hache | 1 | |
| 11:18, 2024 June 28 | Nf41vacuumoff.jpg (file) |  |
706 KB | John Hache | 1 | |
| 11:17, 2024 June 28 | Nf39jobrun.jpg (file) |  |
651 KB | John Hache | 1 | |
| 11:17, 2024 June 28 | Nf38spindlestart.jpg (file) |  |
624 KB | John Hache | 1 | |
| 11:17, 2024 June 28 | Nf37duston40dustoff.jpg (file) |  |
634 KB | John Hache | 1 | |
| 11:17, 2024 June 28 | Nf36startwarn.jpg (file) |  |
782 KB | John Hache | 1 | |
| 11:16, 2024 June 28 | Nf35startpress.jpg (file) |  |
647 KB | John Hache | 1 | |
| 11:16, 2024 June 28 | Nf34cutpart.jpg (file) |  |
652 KB | John Hache | 1 | |
| 11:16, 2024 June 28 | Nf33filetransfer.jpg (file) |  |
671 KB | John Hache | 1 | |
| 11:16, 2024 June 28 | Nf32dustcheck.jpg (file) |  |
646 KB | John Hache | 1 | |
| 11:16, 2024 June 28 | Nf31enterRPM3.jpg (file) |  |
608 KB | John Hache | 1 | |
| 11:16, 2024 June 28 | Nf30enterRPM2.jpg (file) |  |
644 KB | John Hache | 1 | |
| 11:15, 2024 June 28 | Nf29enterRPM1.jpg (file) |  |
642 KB | John Hache | 1 | |
| 11:15, 2024 June 28 | Nf28RPMcheck.jpg (file) |  |
714 KB | John Hache | 1 | |
| 11:15, 2024 June 28 | Nf27storez.jpg (file) |  |
614 KB | John Hache | 1 | |
| 11:15, 2024 June 28 | Nf26zroutine.jpg (file) |  |
639 KB | John Hache | 1 | |
| 11:14, 2024 June 28 | Nf25testconnect.jpg (file) |  |
712 KB | John Hache | 1 | |
| 11:11, 2024 June 28 | Nf24zclip.jpg (file) |  |
657 KB | John Hache | 1 | |
| 11:11, 2024 June 28 | Nf23xyzero.jpg (file) |  |
650 KB | John Hache | 1 | |
| 11:09, 2024 June 28 | Nf22zeroaxes.jpg (file) |  |
657 KB | John Hache | 1 | |
| 11:09, 2024 June 28 | Nf21loadup.jpg (file) |  |
664 KB | John Hache | 1 | |
| 11:09, 2024 June 28 | Nf20wrench.jpg (file) |  |
676 KB | John Hache | 1 | |
| 11:09, 2024 June 28 | Nf19colletfix.jpg (file) |  |
632 KB | John Hache | 1 | |
| 11:08, 2024 June 28 | Nf18toolin.jpg (file) |  |
610 KB | John Hache | 1 | |
| 11:08, 2024 June 28 | Nf17collettight.jpg (file) |  |
648 KB | John Hache | 1 | |
| 11:08, 2024 June 28 | Nf16colletbuild.jpg (file) |  |
630 KB | John Hache | 1 | |
| 11:08, 2024 June 28 | Nf15colletclean.jpg (file) |  |
673 KB | John Hache | 1 | |
| 11:08, 2024 June 28 | Nf14bypass.jpg (file) |  |
685 KB | John Hache | 1 | |
| 11:07, 2024 June 28 | Nf13vacuumon.jpg (file) |  |
606 KB | John Hache | 1 | |
| 11:07, 2024 June 28 | Nf11cleanload48cleanup.jpg (file) |  |
621 KB | John Hache | 1 | |
| 11:07, 2024 June 28 | Nf10vacuum12valveopen.jpg (file) |  |
671 KB | John Hache | 1 | |
| 11:05, 2024 June 28 | Nf9arrow.jpg (file) |  |
668 KB | John Hache | 1 | |
| 11:05, 2024 June 28 | Nf8keypad.jpg (file) |  |
638 KB | John Hache | 1 | |
| 11:05, 2024 June 28 | Nf7shopbotswr.jpg (file) |  |
593 KB | John Hache | 1 | |
| 11:05, 2024 June 28 | Nf6reset.jpg (file) |  |
679 KB | John Hache | 1 | |
| 11:05, 2024 June 28 | Nf5poweron.jpg (file) |  |
717 KB | John Hache | 1 | |
| 11:04, 2024 June 28 | Nf4estop.jpg (file) |  |
687 KB | John Hache | 1 | |
| 11:04, 2024 June 28 | Nf3airon.jpg (file) |  |
616 KB | John Hache | 1 | |
| 11:04, 2024 June 28 | Nf2computeron.jpg (file) |  |
622 KB | John Hache | 1 | |
| 11:04, 2024 June 28 | Nf1RoomExhaust.jpg (file) |  |
605 KB | John Hache | 1 | |
| 12:46, 2024 June 22 | 3axisShopBot.jpg (file) |  |
3.65 MB | John Hache | ShopBot PRSAlpha | 1 |
| 12:16, 2024 June 22 | BambuGuide.jpg (file) |  |
1.83 MB | John Hache | 1 | |
| 11:44, 2024 June 22 | DrillPress.jpg (file) |  |
3.79 MB | John Hache | Drill Press wood | 1 |
| 14:21, 2024 June 21 | Cyclone.jpg (file) |  |
1.17 MB | John Hache | 1 | |
| 14:20, 2024 June 21 | DustCollectSanding.jpg (file) |  |
1.59 MB | John Hache | 1 | |
| 14:20, 2024 June 21 | DustCollectSaw.jpg (file) |  |
1.46 MB | John Hache | 1 | |
| 14:19, 2024 June 21 | DustCollectBSMS.jpg (file) |  |
1.67 MB | John Hache | Band saw and miter saw dust collector | 1 |
| 14:18, 2024 June 21 | SCMiterSaw.jpg (file) |  |
3.57 MB | John Hache | Sliding Compound Miter Saw | 1 |
| 14:16, 2024 June 21 | DustCollectCNC.jpg (file) |  |
1.76 MB | John Hache | CWI DustFX in the CNC room | 1 |
| 14:14, 2024 June 21 | Shear.jpg (file) |  |
3.59 MB | John Hache | National shear | 1 |
| 10:50, 2024 June 21 | MetalDrillPress.jpg (file) |  |
1.62 MB | John Hache | 1 | |
| 10:48, 2024 June 21 | LaserVacuum.jpg (file) |  |
959 KB | John Hache | 1 | |
| 10:46, 2024 June 21 | Fusion.jpg (file) |  |
814 KB | John Hache | Epilog Fusion laser | 1 |
| 10:45, 2024 June 21 | TinyBeltDiscSand.jpg (file) |  |
4.27 MB | John Hache | Tiny belt/disc sander | 1 |
| 10:37, 2024 June 21 | BeltDiscSmall.jpg (file) |  |
830 KB | John Hache | 1 | |
| 10:35, 2024 June 21 | X1Carbon.jpg (file) |  |
3.33 MB | John Hache | X1 Carbon | 1 |
| 10:29, 2024 June 21 | MetalLathe.jpg (file) |  |
1.04 MB | John Hache | Baleigh Metal Lathe | 1 |
| 10:28, 2024 June 21 | BemchGrinder.jpg (file) |  |
3.66 MB | John Hache | Bench grinder with standard wheels | 1 |
| 10:18, 2024 June 21 | 6in Bench Grinder (wire wheels).jpg (file) | .jpg) |
1.15 MB | John Hache | Bench grinder with wire wheels installed | 1 |
| 10:11, 2024 June 21 | BeltDiscSand.jpg (file) |  |
1.55 MB | John Hache | Large belt/disc sander | 1 |
| 07:38, 2024 June 21 | P1S.jpg (file) |  |
705 KB | John Hache | Bambu Labs P1S | 1 |
| 07:35, 2024 June 21 | P1SAMS.jpg (file) |  |
772 KB | John Hache | P1S with AMS | 1 |
| 07:12, 2024 June 21 | 2TonShopCrane.jpg (file) |  |
716 KB | John Hache | 2 Ton Shop Crane - basic | 1 |
| 08:54, 2024 June 9 | Global Max 1508 Waterjet system.jpg (file) |  |
3.74 MB | Ttenbergen | Category:Tool | 1 |
| 16:30, 2024 June 8 | Thickness Planer.jpg (file) |  |
7.04 MB | Ttenbergen | Category:Tool | 1 |
| 08:36, 2024 June 2 | Breathing hazard.svg (file) |  |
208 KB | Ttenbergen | icon for Breathing hazard Category:Hazard | 1 |
| 20:43, 2024 May 17 | Test with link.svg (file) |  |
9 KB | Ttenbergen | 3 | |
| 16:46, 2024 April 1 | Testtool.png (file) |  |
689 bytes | Ttenbergen | 1 | |
| 23:06, 2024 March 31 | NF no photo.png (file) |  |
16 KB | Ttenbergen | 1 |
