Baileigh Lathe

Tools
Model	PL-1340E-1.0
Room	No room assigned
Work envelope/max capacity	Distance Between Centers (In.): 40"; Leadscrew Thread Pitch: 8 T.P.I.; Length of Gap: 5"; Spindle Bore: 1.50"; Spindle Diameter: 1.65"; Spindle Taper: Morse #3; Spindle Travel: 4.5";
Link to manual
Related tools	;
Trainer(s)
Training Sessions	Lathe Training;
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables
Software	this machine has no software listed
Equipment type	tool

Metal Working Room Precautions apply
You will be working in the Metal Working Room . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: Metal Working Room/Precautions

edit these instructions at Instructions:Baileigh Lathe

Entanglement hazard: getting sucked into the lathe will result in death or dismemberment. Do not:

Wear loose hair, clothing, jewellery, earbuds, etc. NO HOODIES OR GLOVES. TIE BACK long sleeves.
Reach over the chuck while the spindle is running
Clear chips, change tools, or measure parts while the spindle is running
Use the equipment if you're tired, distracted, intoxicated, or otherwise impaired

Projectile hazard: objects and chips being thrown by the lathe. Do not:

Laceration hazard: sharp parts and tools. Do not:

Board to protect ways when changing chuck
Not using compressed air to clean
Protecting ways with drop cloth when sanding
Wipe ways before starting due to grinding dust?
Cleaning chips when done: nothing on carriage or ways, empty chip tray when a layer of chips has formed on the bottom