New pages

15:52, 2024 October 21 ‎Training Validation (hist | edit) ‎[1,468 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Discuss | Marney John Meta-training * Don't think we explain Proficiency Training on the wiki yet. Is that our official term for it? If so I will make a page for it and get it linked in somehow. Do we always charge half for it? Are there prerequisites to be allowed to only take proficiency training? Ttenbergen (talk) 20:59, 2024 October 16 (CDT) ** Proficiency Training works, so does Training Validation. Prerequisite...")
22:09, 2024 October 17 ‎Impaired, intoxicated or tired use of the Fablab (hist | edit) ‎[434 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Discuss | * Woodworking Sanding Room/Precautions mentions this, but it should likely be facility wide and with the right definiitons. Haven't read it yet but just stumbled over [https://www.csagroup.org/store/product/CSA%20Z1008%3A21/ CAN/CSA-C22.2 NO. 60745-2-3-07/A1:13 + A2:13 (R2022)] which might be helpful. ~~~~ }} Category:Safety")
13:26, 2024 October 15 ‎SDS Binder (hist | edit) ‎[844 bytes] ‎Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}}s contain the SDSs for chemicals stored nearest them to make them available to workers as required under WHMIS. {{Discuss | Marney, John * Where are these? If we have several we should probably make a page for each so they can list and locate separately. It says one is in the 3D Printing Room, where are the others? }} Category:Safety Category:WHMIS")
13:19, 2024 October 15 ‎WHMIS training (hist | edit) ‎[838 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Training Session |cost= |duration= |trainers=online |tools= |rooms= }} {{Discuss | Marney John Safety * This is available for trainers and Member Council - is it also available for everyone else? ~~~~ * Can you fill in the details eg link. ~~~~ }} Category:WHMIS")
12:42, 2024 October 15 ‎Returning members (hist | edit) ‎[2,013 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Discuss | Safety Training John Marney * What are our recommendations for returning members? * At some point there was talk about re-training being available for free for previously trained members, as long as they don't require an extra sesssion. Did we ever formalize that? }} * Special:RecentChanges can help but can be a lot * More tab, history on tool pages or instruction can be helpful to remind, and to just re-read. Category:Safety")
12:35, 2024 October 15 ‎Hearing protection (hist | edit) ‎[640 bytes] ‎Ttenbergen (talk | contribs) (Created page with "Several Tools and Rooms at the fablab are loud enough that hearing protection is required, sometimes multiple layers. Ideally bring your own that fits you well. If you forgot yours, the fablab supplies some disposable earplugs and some shared over-ear earmuffs. {{Discuss | Emelia Marney * what are the instructions when we run out of ear plugs? Post on consumables? When there are 10 left? * are there standard locations for this stuff? }} Category:Safet...")
12:25, 2024 October 15 ‎Lock-out/Tag-out procedures (hist | edit) ‎[241 bytes] ‎Ttenbergen (talk | contribs) (Created page with "We are required to have {{PAGENAME}} for each tool. === Implementation === See North Forge:LOTO Category:Safety Category:MadeSafe audit")
11:47, 2024 October 15 ‎Safety goggle bin (1st floor) (hist | edit) ‎[204 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Lobby |other details=There is a bin with safety goggles in the Lobby, next to the entrance to the General Assembly Area. {{Toe cap slip-ons}} |equipment_type=safety }} Category:Safety Category:PPE")
11:47, 2024 October 15 ‎Safety goggle bin (3rd floor) (hist | edit) ‎[233 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Lobby |other details=There is a bin with safety goggles in the Lobby, next to the entrance to the General Assembly Area. {{Toe cap slip-ons}} |equipment_type=safety }} Category:Safety Category:PPE")
11:46, 2024 October 15 ‎Eye protection (hist | edit) ‎[431 bytes] ‎Ttenbergen (talk | contribs) (Created page with "Wear {{PAGENAME}} so you won't need to use one of the Eye Wash Stations. Ideally bring your own that fits you well. If you wear glasses you might want to consider prescription safety googles, but we have some that fit over glasses. If you didn't bring your own eye protection, the Fablab has some to lend out at: * safety goggle bin (1st floor) * safety goggle bin (3rd floor) Category:Safety Category:PPE")
11:40, 2024 October 15 ‎Safety footwear (hist | edit) ‎[420 bytes] ‎Ttenbergen (talk | contribs) (Created page with "Wear {{PAGENAME}}. If you don't have any or forgot yours, pick up some toe cap slip-ons from the Toe cap bin (1st floor)/Toe cap bin (3rd floor). Generally, you need [https://www.ccohs.ca/oshanswers/prevention/ppe/footwear.html CSA approved footwear] with a green triangle lable. {{Discuss | For welding there was a requirement for boots, what were the details? }} Category:Safety Category:PPE")
11:25, 2024 October 15 ‎Compressed air distribution (pipes and hoses) (hist | edit) ‎[559 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
11:11, 2024 October 15 ‎Hazardous waste (hist | edit) ‎[578 bytes] ‎Ttenbergen (talk | contribs) (Created page with "Garbage that can't go in the regular bins that is fit for the Sharps Disposal Station or the Electronics recycling bin If members produce small quantities, such as empty paint cans, they should take them away and dispose of them personally. {{Discuss | Marney Nathan had said he would find out more. Did he ever get back to us? He mentioned Miller environmental being used by companies who have a lot of waste. incl. empty cans, fluorescent bulbs, etc }}...")
11:05, 2024 October 15 ‎Fit testing (hist | edit) ‎[319 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Discuss | Marney Nathan said that respirator fit testing is available for members Wednesdays... how would members access this? ~~~~ }} Category:PPE")
10:56, 2024 October 15 ‎Personal Protective Equipment (hist | edit) ‎[206 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Discuss | * intended as an index page for PPE related pages, not so much for all about them. }} * Toe cap bin (1st floor) * Toe cap shelf (3rd floor) Category:Safety Category:PPE")
10:50, 2024 October 15 ‎Toe cap bin (1st floor) (hist | edit) ‎[245 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Room between Design Space and Metalworking Room |other details=The toe caps are in a box in the Room between Design Space and Metalworking Room. {{Toe cap slip-ons}} |equipment_type=safety }} Category:Safety")
10:50, 2024 October 15 ‎Toe cap shelf (3rd floor) (hist | edit) ‎[218 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Lobby |other details=The toe caps are on a shelf in the Lobby, next to the entrance to the General Assembly Area. {{Toe cap slip-ons}} |equipment_type=safety }} Category:Safety")
23:10, 2024 October 13 ‎Visitors at the Fablab (hist | edit) ‎[620 bytes] ‎Ttenbergen (talk | contribs) (Created page with "* Do not to let others in unless you are expecting them ** exceptions: *** Maker's Market *** Tuesday Night Open House *** First Fridays *** MICE program {{Discuss | Marney * Do we have a current document for this? ~~~~ }} * or know they are a member {{Discuss | Marney * you don't know they are a member. You wouldn't know if someone was suspended. How do we handle this now and how do we want to handle this? }} Category:Security")
22:35, 2024 October 13 ‎Risk Assessment Matrix (hist | edit) ‎[324 bytes] ‎Ttenbergen (talk | contribs) (Created page with "This page contains an queried listing of tool risks based on North Forge:Hazard encoding for Tools. See North Forge:Risk Assessment Matrix for more info about the encoding. {{Discuss | * need to set this up. }} Category:MadeSafe audit Category:Safety")
10:22, 2024 October 10 ‎Safety Terminology (hist | edit) ‎[2,791 bytes] ‎John Hache (talk | contribs) (Made page, might delete or transform later)
10:20, 2024 October 10 ‎Safe Work Procedures (hist | edit) ‎[4,211 bytes] ‎John Hache (talk | contribs) (Made page, might delete or transform later)
14:36, 2024 October 8 ‎Electronics recycling bin (hist | edit) ‎[360 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Metalworking Room |other details= * put small electronics in here for recycling * put batteries in here as well ** put batteries in bags to avoid short circuits ** bags are supplied on the bin {{Discuss | * instructions for members when full * what does NF do wth this when full? }} |equipment_type=infrastructure }} Category:Waste removal")
14:34, 2024 October 8 ‎Fire wood bin (hist | edit) ‎[302 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Woodworking Room |other details= * contents free for all to take, only add untreated * when the bin is full... {{Discuss | * what are the instructions when the bin is full? Who do members contact? What happens to excess? }} |equipment_type=infrastructure }} Category:Waste removal")
14:15, 2024 October 8 ‎Metal recycling bin (metal room) (hist | edit) ‎[135 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool}} {{Template:Metal recycling}} Category:Waste removal")
14:15, 2024 October 8 ‎Metal recycling bin (general assembly area) (hist | edit) ‎[139 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool}} {{Template:Metal recycling}} Category:Waste removal")
23:44, 2024 September 26 ‎Workplace Safety and Health Co-Chair (hist | edit) ‎[2,065 bytes] ‎Ttenbergen (talk | contribs) (Created page with "Under the {{Act}} the fablab has to have two {{PAGENAME}}s. * an employer Co-Chair (currently Tina Tenbergen) * an employee Co-Chair (currently Lawrence Rosdubutko) {{Discuss | needs responsibilities as per act, and anything the fablab wants to add}} Category:Safety")
23:35, 2024 September 26 ‎Safety Dashboard (hist | edit) ‎[570 bytes] ‎Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}} is the tool used by the Safety Committee to keep track of its outstanding tasks. It's in the form of a googledoc. Emelia is the "keeper" of this document. We considered making this open to members to view, but it currently contains tracking information that would identify individual members. We could likely come up with a solution for this, such as putting the dashboard onto the wiki and maintaining a link to a minimally shared google doc for priva...")
07:48, 2024 September 26 ‎Safety Resources (hist | edit) ‎[1,632 bytes] ‎John Hache (talk | contribs) (Create page safety resources)
16:58, 2024 September 24 ‎Rigol Arbitrary Waveform Generator (hist | edit) ‎[823 bytes] ‎Dostapchuk (talk | contribs) (Created page with "{{Tool |room=IoT Innovation Lab |model=DG1032Z |work envelope=2 channels, 30 MHz, 200 MSa/s |link to manual=https://beyondmeasure.rigoltech.com/acton/attachment/1579/f-033b/0/-/-/-/-/file.pdf |knowledge keepers=Dave Ostapchuk |other details=== Manuals and Documentation == * User Guide: https://beyondmeasure.rigoltech.com/acton/attachment/1579/f-0450/0/-/-/-/-/file.pdf * Programming Guide: https://beyondmeasure.rigoltech.com/acton/attachment/1579/f-0493/1/-/-/-/-/DG10...")
16:52, 2024 September 24 ‎Rigol DC Power Supply (hist | edit) ‎[1,033 bytes] ‎Dostapchuk (talk | contribs) (Created page with "{{Tool |room=IoT Innovation Lab |model=DP832 |work envelope=3 channels, 30 V maximum, 3 A maximum, 195 W |link to manual=https://beyondmeasure.rigoltech.com/acton/attachment/1579/f-035e/0/-/-/-/-/file.pdf |knowledge keepers=Dave Ostapchuk |other details=== Capabilities == This power supply has 3 channels: * Channel 1 can provide 30 V / 3 A * Channel 2 can provide 30 V / 3 A * Channel 3 can provide 5 V / 3 A Note that Channels 2 and 3 share their common. == Ma...")
16:40, 2024 September 24 ‎Rigol Mixed Signal Oscilloscope (hist | edit) ‎[605 bytes] ‎Dostapchuk (talk | contribs) (Created page with "{{Tool |room=IoT Innovation Lab |model=DS1104Z Plus |work envelope=This oscilloscope has 4 analog channels and 16 digital channels. It has a bandwidth of 100 MHz. |link to manual=https://beyondmeasure.rigoltech.com/acton/attachment/1579/f-0506/1/-/-/-/-/MSO1000Z%26DS1000Z_QuickGuide.pdf |knowledge keepers=Dave Ostapchuk |other details=User Guide: https://beyondmeasure.rigoltech.com/acton/attachment/1579/f-050a/1/-/-/-/-/MSO1000Z%26DS1000Z_UserGuide.pdf Programming Gui...")
15:34, 2024 September 24 ‎Reflow oven (hist | edit) ‎[1,071 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
11:18, 2024 September 24 ‎Safety equipment (hist | edit) ‎[448 bytes] ‎Ttenbergen (talk | contribs) (Created page with "The fablab has a fair bit of safety-relevant equipment. Members should know it exists, and when and how they might need to use it. {{#cargo_query: intro=North Forge has the following tools: |tables=tool, room |join on=tool.room=room._pageName |fields=tool._pageName=Tool, room=Room, concat(floor, " floor")=Floor |where=equipment_type="safety" |order by=tool._pageName |limit=500 |default=no tools found |format=dynamic table |rows per page=500 }}")
11:13, 2024 September 24 ‎Compressed air gun (hist | edit) ‎[714 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
11:13, 2024 September 24 ‎Compressed air system (hist | edit) ‎[511 bytes] ‎Ttenbergen (talk | contribs) (Created page with "The fablab has infrastructure to supply compressed air to the facility. {{Discuss | Safety Marney This equipment runs at high air pressure. There is risk from air injection, whipping air hoses and a bunch of other things. There are legal considerations (https://www.gov.mb.ca/labour/safety/pdf/whs_workplace_safety_act_and_regs.pdf 16.24, I think we have SWPs. Jeff wants a rule where members are not allowed to mess with any threaded connections. Needs more consideration....")
11:04, 2024 September 24 ‎200 Gal Compressed Air Tank (1st floor) (hist | edit) ‎[186 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Metalworking Room |other details=The {{PAGENAME}} is part of the Compressed air system .Do not touch it without maintenance permission. |equipment_type=infrastructure }}")
09:29, 2024 September 24 ‎Mission and Vision (hist | edit) ‎[1,082 bytes] ‎Ttenbergen (talk | contribs) (Created page with "The Fablab is part of the [https://northforge.ca/we-are-north-forge/ North Forge Business Incubator], and they dictate our mission and vision.  == Northforge Business Incubator == === Vision === To put Manitoba on the world map as a global leader in innovation, working collaboratively with the local ecosystem and across Canada. === Mission...")
09:29, 2024 September 24 ‎Decision making process for equipment purchases (hist | edit) ‎[664 bytes] ‎Ttenbergen (talk | contribs) (Created page with "This page explains how decisions are made what new equipment is purchased for the Fablab.  When Marney evaluates equipment purchases she prioritize based on: * It directly supports the FabLab mission by demonstrating its role in providing critical resources that attract and retain members * member workflow * maintenance efforts * business...")
20:17, 2024 September 23 ‎Broken LKPF PC (hist | edit) ‎[171 bytes] ‎Ttenbergen (talk | contribs) (Created page with "{{PC |software=LKPF Software |tools_driven_by= |room= }}")
23:16, 2024 September 22 ‎Hakko FA-430 Fume Extractor (hist | edit) ‎[1,548 bytes] ‎Mpatryluk (talk | contribs) (Page creation)