Hakko FA-430 Fume Extractor: Difference between revisions

Tools
Model	Hakko FA-430
Room	IoT Innovation Lab
Work envelope/max capacity	Uses a vacuum to pull soldering fumes and smoke through a freestanding duct and into the unit where the dirty air is passed through a pre-filter and a main filter.
Link to manual	https://hakkousa.com/amfile/file/download/file/2598/product/9991/
Related tools	Weller Soldering Station;
Trainer(s)
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables	* Pre-filters (the orange ones, inexpensive). Kept in a box labelled "Hakko Pre Filters". Main filters (the metal and pleated ones, expensive). We go many years between replacing these so don't keep spares on hand. They need replacement after the 5th pre-filter replacement;
Software	this machine has no software listed
Equipment type	safety

VisualWikitext

Latest revision as of 04:45, 2024 September 23

IoT Innovation Lab Precautions apply
You will be working in the IoT Innovation Lab . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: WORK IN PROGRESS Tools and consumables in this room contain toxic chemicals, lead, and are a fire risk. Equipment in this room can carry dangerously high voltage and current. NO EATING OR DRINKING IN THE IoT INNOVATION LAB When working with any liquids or emulsions (including water, flux, cleaning products, solder paste, etc,) ensure you have paper towels nearby to contain and clean up a spill. When working with any hazardous chemicals or substances (eg. solder paste, flux, cleaning products, etchant, etc) you must wear nitrile gloves and eye protection. Keep flammables, such as isopropyl alcohol, away from sources of heat, such as soldering irons, hot air guns, and PCB preheaters

@@ Line 5: / Line 5: @@
 |link to manual=https://hakkousa.com/amfile/file/download/file/2598/product/9991/
 |related tools=Weller Soldering Station
-|consumables=Pre-filters (the orange ones, inexpensive). Kept in a box labelled "Hakko Pre Filters".
+|consumables=
+* Pre-filters (the orange ones, inexpensive). Kept in a box labelled "Hakko Pre Filters".
-Main filters (the metal and pleated ones, expensive). Unknown if any spares are currently in stock.
+* Main filters (the metal and pleated ones, expensive). We go many years between replacing these so don't keep spares on hand. They need replacement after the 5th pre-filter replacement
 |equipment_type=safety
+|other=
+* you made an evil twin page; I had called this [[Soldering fume extractor]]. We'll need to combine them.
+** I have been trying to shift pages over to generic names unless the brand name is our main way to refer to a tool, like the Roland. The long names are making lists hard to read on mobile.
+* to prevent making evil twins, do a search and also have a look at the contents of the room that already have a page.
+* I like your description. We should have a spot for that on all the tools. But for now the template doesn't have that spot, and the work envelope section isn't it. This would reuquire a bunch of changes to [[template:Tool]], [[Form:Tool]] and once the field exists other things like the room template and other lists could get updated to include the description. Or not.
+* As part of considering this tool, also have a look at [[Soldering workstation]]
 }}