More actions
Ttenbergen (talk | contribs) |
Ttenbergen (talk | contribs) auxiliary fence |
||
| Line 38: | Line 38: | ||
# Using a push block in the left hand if required, press firmly down and to the right, registering the edge against the fence and controlling the board’s motion. With a push block in the right hand if required, feed the board forwards. | # Using a push block in the left hand if required, press firmly down and to the right, registering the edge against the fence and controlling the board’s motion. With a push block in the right hand if required, feed the board forwards. | ||
# Check the workpiece for squareness. | # Check the workpiece for squareness. | ||
=== Auxiliary fence === | |||
* The auxiliary fence is used for better control and push-pad clearance, when jointing low material or when material is better controlled by a low fence (Fig. 15 & 16). To operate this fence, with power OFF, slightly lift from top of main fence to unlock and rotate until it is securely against the table and side of the main fence. When not in use, rotate to top of fence and lower on top of fence to lock in place. (as per manual p22) | |||
== Shutdown and Housekeeping == | == Shutdown and Housekeeping == | ||