More actions
Ttenbergen (talk | contribs) some tweaks and some questions |
John Hache (talk | contribs) Added epoxy to list of things that need SS bypass |
||
| Line 6: | Line 6: | ||
*How and when to use safety devices (featherboards, push sticks) | *How and when to use safety devices (featherboards, push sticks) | ||
*How and when to use North Forge's sleds and fixtures | *How and when to use North Forge's sleds and fixtures | ||
*What types of blades are | *What types of blades are suitable for different jobs | ||
We also need photos: | We also need photos: | ||
*Blade change procedure | *Blade change procedure | ||
*Photo of SawStop indicator lights | |||
*Sawstop Override key | |||
}} | }} | ||
==Purpose== | ==Purpose== | ||
| Line 27: | Line 29: | ||
*Foil-backed materials, including foil-backed acrylic | *Foil-backed materials, including foil-backed acrylic | ||
*Carbonized (charred) wood, including laser cut edges | *Carbonized (charred) wood, including laser cut edges | ||
*Epoxy resin | |||
To check materials: | To check materials: | ||
#Turn on the room exhaust, dust collector, and main power switch. | #Turn on the room exhaust, dust collector, and main power switch. | ||
#With the blade stopped, press the material against the blade. Observe the | #With the blade stopped, press the material against the blade. Observe the colour of the indicator light: | ||
*Green means okay to cut. | *Green means okay to cut. | ||
*Red means not okay to cut. The SawStop system will activate. | *Red means not okay to cut. The SawStop system will activate. | ||
| Line 99: | Line 102: | ||
**Open the side panel to check the motor housing; close the panel and run the saw briefly to confirm interlocks are closed | **Open the side panel to check the motor housing; close the panel and run the saw briefly to confirm interlocks are closed | ||
**Disconnect the dust tube to check for clogs, reattach the tube | **Disconnect the dust tube to check for clogs, reattach the tube | ||
{{Discuss |}} | |||
*Wipe the table, fence, handles with a brush | *Wipe the table, fence, handles with a brush | ||
*Sweep the floor around the table saw, band saw, miter saw, router table. | *Sweep the floor around the table saw, band saw, miter saw, router table. | ||