Edge Sander

GeneralInstructions

Tools
Model	CWI-S6089XS
Room	Woodworking Sanding Room
Work envelope/max capacity	6" width
Link to manual
Related tools
Trainer(s)	Paolo Riva
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables	* Disc: 9in Belt: 6″ x 89″
Software	this machine has no software listed
Equipment type	tool

Woodworking Sanding Room Precautions apply

You will be working in the Woodworking Sanding Room . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: Safety Hazards Dust Noise Projectile (materials being thrown Laceration (sharp edges created by workpiece) Entanglement (spinning parts sucking user into equipment) PPE Hearing Protection Respiratory protection (minimum N95 mask; respirator preferred) Safety Glasses Safety shoes Tie back or remove loose hair, clothing, jewelry, etc. Precautions Do Read the Safe Work Procedure and obtain North Forge approval before using the equipment for the first time. Maintain a calm but vigilant attitude. If you are stressed or in a hurry, it’s best not to use the equipment. Tie back long hair and jewelry; remove earbuds and hoodie cords. Check the workspace for slip and trip hazards. Ensure the equipment is in good condition (hoses and power cords in good condition, no clogs in dust extraction hoses). Inspect the material for cracks, knots, or debris before starting - material can shatter or kick back if it is not stable. Check the equipment for trapped debris when done. Use a brush and/or vacuum to clean most of the dust before finishing with compressed air. Do not Use the equipment if you are tired, intoxicated, or otherwise impaired Rush Distract operators - if you need to get someone’s attention, stand to the side and wait until they notice you. Do not wave, shout, or touch the operator. Leave the equipment with equipment still running - note that hearing protection can prevent users from hearing when the equipment is/is not running. Sand metal due to risk of sparks and equipment/property damage. Housekeeping Check the working area for slip and trip hazards (sawdust, oil, offcuts) before and after working Do not leave air hoses or extension cords laying across walkways where people can trip on them Check hoses for excess sawdust or other clogs Empty the dust collector if it is filled to more than halfway up the viewing window (~1 garbage bag worth of dust) Empty waste bins if they are more than 75% full Bag waste should be less than 6x6” Blunt any sharp corners that could puncture the bag Replace waste bags after emptying Firewood bins are only for untreated wood with no paints or stains Return all fab lab tools to their proper locations Remove all personal tools, materials, and equipment from the room Fire code prohibits storing material in the wood room Turn off the equipment and dust collector. Turn off the room exhaust if you are the last one in the room. Room exhaust is interlocked with equipment power; turning off the exhaust will turn off all equipment in the room!

• manufaturer's link: https://www.cwimachinery.com/sandx-sanding-machines/edge-sanders-2/sandx-6-89-extreme-oscillating-edge-sander

Instructions:Edge Sander doesn't exist yet