More actions
John Hache (talk | contribs) Partial instructions. |
John Hache (talk | contribs) m Resolve discuss question |
||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
Want to learn more about 3D printing in general? Visit [[Instructions:FDM Printing]] | |||
== Slicer == | |||
Bambu printers use Bambu Studio for slicing. | |||
[[File:BambuGuide.jpg|thumb|890x890px|left]] | |||
# Printer: This menu is used to select the printer '''type.''' Users will send prints to a specific machine at the end of the slicing process. | |||
# Plate Type: This menu is used to select the plate type. Always ensure the plate type is suitable for the print and is physically installed on the printer. | |||
# Material preset docker: This menu contains the types or colours of filament that will be used for the print job. Prints on the P1S standard printer will only have one option shown; when using the P1S with AMS, members can add more filament colours or types using the “+” button. Selecting the “edit” icon will open a list of available filament presets. | |||
# Process: This menu is used to determine whether the selected options apply to the entire build plate or only to a single object. It also contains the layer height presets. | |||
# Layer thickness presets: choose a preset for a given layer thickness. | |||
# Slice Plate: This menu has standard printing options like infill, speed, temperature, and support. | |||
# Device: this menu allows the user to monitor and control individual printers that are registered to the Bambu Studio account. This menu is automatically shown when a print is sent to a printer. | |||
# Slice Plate: this option is used to slice the plate for printing. Users can also choose to slice a group of plates for consecutive printing using the drop-down menu. | |||
# Print plate: this option is used to send the plate to the printer and begin printing immediately. Users can also choose to only send the file to the printer but begin the print manually, or to export print files to portable media (MicroSD). Note: When printing directly from Bambu Studio, the print file is sent to Bambu’s foreign servers before being sent to the printer. Members with Intellectual Property concerns may therefore choose to export to portable media for printing. | |||
Depending on the selected printer, different options may be displayed for the filament, calibration, and timelapse settings when the print is sent to a printer. Note that North Forge users have reported issues with print failures when using the timelapse setting. | |||
=== Poop Management === | === Poop Management === | ||
| Line 6: | Line 23: | ||
=== Build Plates === | === Build Plates === | ||
The Bambu printers can use different build plates for different filament types. Note that some build plates require a glue stick for proper adhesion; if you use a glue stick, please clean the plate with soap and water when you are done. Do not use isopropyl alcohol or solvents on the build plates. | The Bambu printers can use different build plates for different filament types. | ||
When people handle the build plate, their hands will deposit oils and dirt that can affect the build plate. It's therefore a good idea to rinse the plate with soap and water periodically (every 3-4 prints) to remove oil and dirt. | |||
Note that some build plates require a glue stick for proper adhesion; if you use a glue stick, please clean the plate with soap and water when you are done. Do not use isopropyl alcohol or solvents on the build plates. | |||
==== Textured PEI Plate ==== | ==== Textured PEI Plate ==== | ||
| Line 13: | Line 34: | ||
==== Engineering/Cool Plate ==== | ==== Engineering/Cool Plate ==== | ||
The engineering/cool plate is a double-sided plate. The cool side is designed specifically for PLA, though you can also use it for PETG. The engineering side is used for exotic engineering materials like ABS, TPU, PA, and Polycarbonate. Glue is strongly recommended for both the engineering side and the cool side. | The engineering/cool plate is a double-sided plate. The cool side is designed specifically for PLA, though you can also use it for PETG. The engineering side is used for exotic engineering materials like ABS, TPU, PA, and Polycarbonate. Glue is strongly recommended for both the engineering side and the cool side. | ||
== Printing From Home == | |||
Printing from home is technically possible if you log in with North Forge credentials. However, there are several practical problems: | |||
* You cannot always confirm that the correct filament and build plate are installed | |||
* You may not be able to tell if there is an object on the print bed - the cameras cannot see the bed when it is fully loaded | |||
Latest revision as of 07:57, 2024 August 19
Want to learn more about 3D printing in general? Visit Instructions:FDM Printing
Slicer[edit | edit source]
Bambu printers use Bambu Studio for slicing.
- Printer: This menu is used to select the printer type. Users will send prints to a specific machine at the end of the slicing process.
- Plate Type: This menu is used to select the plate type. Always ensure the plate type is suitable for the print and is physically installed on the printer.
- Material preset docker: This menu contains the types or colours of filament that will be used for the print job. Prints on the P1S standard printer will only have one option shown; when using the P1S with AMS, members can add more filament colours or types using the “+” button. Selecting the “edit” icon will open a list of available filament presets.
- Process: This menu is used to determine whether the selected options apply to the entire build plate or only to a single object. It also contains the layer height presets.
- Layer thickness presets: choose a preset for a given layer thickness.
- Slice Plate: This menu has standard printing options like infill, speed, temperature, and support.
- Device: this menu allows the user to monitor and control individual printers that are registered to the Bambu Studio account. This menu is automatically shown when a print is sent to a printer.
- Slice Plate: this option is used to slice the plate for printing. Users can also choose to slice a group of plates for consecutive printing using the drop-down menu.
- Print plate: this option is used to send the plate to the printer and begin printing immediately. Users can also choose to only send the file to the printer but begin the print manually, or to export print files to portable media (MicroSD). Note: When printing directly from Bambu Studio, the print file is sent to Bambu’s foreign servers before being sent to the printer. Members with Intellectual Property concerns may therefore choose to export to portable media for printing.
Depending on the selected printer, different options may be displayed for the filament, calibration, and timelapse settings when the print is sent to a printer. Note that North Forge users have reported issues with print failures when using the timelapse setting.
Poop Management[edit | edit source]
The Bambu P1S produces filament waste ("poop") that is ejected through a hole in the back. Accordingly, we have installed Poop Chutes to direct and collect the waste. Please empty the poop after each print.
As an experiment, North Forge is collecting ABS and PETG poop for recycling. There are two labelled buckets for poop. Please sort your poops into the appropriate bucket. The buckets are for poop and stringers only (not failed prints or other large clumps of waste).
Build Plates[edit | edit source]
The Bambu printers can use different build plates for different filament types.
When people handle the build plate, their hands will deposit oils and dirt that can affect the build plate. It's therefore a good idea to rinse the plate with soap and water periodically (every 3-4 prints) to remove oil and dirt.
Note that some build plates require a glue stick for proper adhesion; if you use a glue stick, please clean the plate with soap and water when you are done. Do not use isopropyl alcohol or solvents on the build plates.
Textured PEI Plate[edit | edit source]
The textured PEI plate is used for PLA, ABS, and PETG. It leaves a textured surface on the bottom of prints. Typically you will not need to use a glue stick, however if you're printing with PETG it can help protect the bed.
Engineering/Cool Plate[edit | edit source]
The engineering/cool plate is a double-sided plate. The cool side is designed specifically for PLA, though you can also use it for PETG. The engineering side is used for exotic engineering materials like ABS, TPU, PA, and Polycarbonate. Glue is strongly recommended for both the engineering side and the cool side.
Printing From Home[edit | edit source]
Printing from home is technically possible if you log in with North Forge credentials. However, there are several practical problems:
- You cannot always confirm that the correct filament and build plate are installed
- You may not be able to tell if there is an object on the print bed - the cameras cannot see the bed when it is fully loaded