Weller Soldering Station: Difference between revisions

Tools
Model	Weller WR3M
Room	IoT Innovation Lab
Work envelope/max capacity
Link to manual	manual
Related tools	Soldering_fume_extractor;
Trainer(s)	No Training Available
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables	Solder, filters, suction cups for pickup tool
Software	this machine has no software listed
Equipment type	tool

Latest revision as of 16:20, 2024 September 25

IoT Innovation Lab Precautions apply
You will be working in the IoT Innovation Lab . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: WORK IN PROGRESS Tools and consumables in this room contain toxic chemicals, lead, and are a fire risk. Equipment in this room can carry dangerously high voltage and current. NO EATING OR DRINKING IN THE IoT INNOVATION LAB When working with any liquids or emulsions (including water, flux, cleaning products, solder paste, etc,) ensure you have paper towels nearby to contain and clean up a spill. When working with any hazardous chemicals or substances (eg. solder paste, flux, cleaning products, etchant, etc) you must wear nitrile gloves and eye protection. Keep flammables, such as isopropyl alcohol, away from sources of heat, such as soldering irons, hot air guns, and PCB preheaters

Burn / fire / lead / chemical risk.

Note that this soldering station has the following attachments:

There is also a separate Weller_Desoldering_Iron.

THIS EQUIPMENT IS FOR ELECTRONICS USE ONLY. DO NOT USE FOR PLUMBING OR AUTOMOTIVE REPAIRS.

DO NOT USE ACID-CORE SOLDER WITH THIS EQUIPMENT.

DO NOT USE THIS EQUIPMENT TO CUT PLASTIC/FOAM/RUBBER.

@@ Line 1: / Line 1: @@
- {{Tool|room=IoT Innovation Lab | model =  | work envelope =  | link to manual =  | related tools =  | trainers = No Training Available  | knowledge keepers = | SDS link =  | SWP link =  | consumables }}
+{{Tool
+|photo=IoT_-_Weller_WR3M_-_Solder_Rework_Station.png
+|room=IoT Innovation Lab | model = Weller WR3M | work envelope =  | link to manual = [https://www.weller-tools.com/sites/default/files/products/documents/WEL_WR2_WR3M_Manual_T0055705511_web.pdf manual]
+|related tools = Soldering_fume_extractor
+| trainers = No Training Available  | knowledge keepers = | SDS link =  | SWP link =
+|consumables=Solder, filters, suction cups for pickup tool
+|other details=Burn / fire / lead / chemical risk.
+This tool should only be used in conjunction with the [[Soldering_fume_extractor]] or [[Soldering fume extractor (small spare)]]
+Note that this soldering station has the following attachments:
+* Soldering iron
+* Rework/hot air tool
+* Small/SMD pick-up tool
+There is also a separate [[Weller_Desoldering_Iron]].
+THIS EQUIPMENT IS FOR ELECTRONICS USE ONLY. DO NOT USE FOR PLUMBING OR AUTOMOTIVE REPAIRS.
+DO NOT USE ACID-CORE SOLDER WITH THIS EQUIPMENT.
+DO NOT USE THIS EQUIPMENT TO CUT PLASTIC/FOAM/RUBBER.
+|equipment_type=tool }}