Editing Instructions:Sawstop Industrial Cabinet Saw (section)

==Blade Changes==
#Turn off the saw, saw breaker switch, and dust collector.
#Remove the zero clearance throat plate.
#Remove the riving knife.
#Use the two table saw wrenches to loosen the nut. Use caution not to drop the nut into the motor housing.
#Remove the used blade.
#Install the fresh blade such that the teeth are pointing down at the front of the saw. 
#Firmly tighten the blade with the table saw wrenches.
#Reinstall the riving knife.
#Reinstall the throat plate, making sure it is flat and flush with the top of the table (plate must slide under adjustment bolts to be flush).