Editing Instructions:Miller Millermatic 212 Autoset MIG Welder (section)

=== Startup ===

# Set up and turn on [[FRED Welding fume extractor]]
# Attach ground clamp securely to the welding bench or to an exposed metal part of your workpiece.
# Open the main gas valve slightly and ensure there is no hissing sound or leaking. Fully open the valve.
# Turn the machine on and, with voltage and wire speed at zero, pull the trigger and adjust the gas regulator valve to allow 20-35 CFH.
# Adjust voltage and wire feed speed to settings found on chart on the machine.
# Check amount of wire stickout before beginning a weld. Pull the trigger to feed out extra wire, tap it onto the workbench to discharge any extra charge, and trim the wire with welding pliers.