Editing Instructions:ShopBot 3-Axis CNC Mill (section)

=== '''Hazards''' ===
{| class="wikitable"
|+
!Hazard
!Causes
!Mitigation
!
|-
|Fire
|Friction from tools
Improperly installed tools
Overfilled dust collector
|Use correct feeds and speeds

Make sure the tool sticks out far enough

Do not leave the ShopBot unattended

Always check the dust collector before starting and empty if needed
|
|-
|Projectiles
|Workpiece shattering
Tool shattering

Tool slipping

Collision with fixtures and clamps

Debris in wood
|Check for cracks, knots, and debris in wood




Use correct feeds and speeds

Clean tool holder with compressed air

Program file to avoid collisions

Check that actual home position matches programmed home position
|
|-
|Entanglement
|Pinch points
Rapidly moving automatic equipment
|No loose hair, clothing, earbuds, hoodie strings, etc



Make sure tool has stopped before reaching in ([[hearing protection]] can make it hard to tell)

|
|-
|Noise
|Motor noise, vacuum noise, tooling noise
|Wear [[hearing protection]]
|
|-
|Inhalation
|Airborne dust
|Wear dust mask or respirator (minimum N95) while operating and cleaning
|
|}

[[File:ToolCrash.jpg|thumb|800x800px|left|Tool stickout]]
<div style="clear: both"></div>