Editing Instructions:ShopBot 3-Axis CNC Mill (section)

=== Running a Job ===
1. Check the dust collector. If the dust is halfway up the viewing window, empty it before use.
[[File:Nf32dustcheck.jpg|thumb|200x200px|left|Check dust collector]]
<div style="clear: both"></div>

2. Transfer files from USB to the computer. The ShopBot will not be able to read the files if they are left on the USB stick.

[[File:Nf33filetransfer.jpg|thumb|200x200px|left|Transfer files, otherwise the ShopBot won't be able to read them]]
<div style="clear: both"></div>

3. Select CUT PART on screen. Windows Explorer will open; select the part file and open it.

[[File:Nf34cutpart.jpg|thumb|200x200px|left|Select Cut Part]]
<div style="clear: both"></div>

4. Press START on screen. Ignore the yellow file information screen that pops up.

[[File:Nf35startpress.jpg|thumb|200x200px|left|Press Start on-screen]]
<div style="clear: both"></div>

5. DO NOT PRESS OKAY - warning screen will appear.
*Pressing OK without starting the dust collector and spindle will damage the equipment!

[[File:Nf36startwarn.jpg|thumb|200x200px|left|WARNING: Turn on spindle and dust collector before pressing OK!]]
<div style="clear: both"></div>

6. Turn on the dust collector.

[[File:Nf37duston40dustoff.jpg|thumb|200x200px|left|Turn the dust collector on]]
<div style="clear: both"></div>

7. Start the spindle using the START button on the remote.
*Listen to make sure the sound is appropriate - no abnormal vibration, chatter, etc

[[File:Nf38spindlestart.jpg|thumb|200x200px|left|Press the spindle start button]]
<div style="clear: both"></div>

8. Press OK on screen.
*The job will start
*Keep your hand on the space bar, mouse, or E-STOP

[[File:Nf39jobrun.jpg|thumb|200x200px|left|Press OK; the job will start.]]
<div style="clear: both"></div>