Editing Instructions:ShopBot 3-Axis CNC Mill (section)

=== Setup ===
Put on eye protection before starting the ShopBot.

1. Turn on the room exhaust.

[[File:Nf1RoomExhaust.jpg|thumb|200x200px|left|Room Exhaust]]
<div style="clear: both"></div>

2.  Check the dust collector and empty if required


3. Turn on the computer.

[[File:Nf2computeron.jpg|thumb|200x200px|left|Computer on]]
<div style="clear: both"></div>

4. Turn on the air.

[[File:Nf3airon.jpg|thumb|200x200px|left|Air on]]
<div style="clear: both"></div>

5. Reset the E-STOP.

[[File:Nf4estop.jpg|thumb|200x200px|left|Reset E-Stop]]
<div style="clear: both"></div>

6. Turn on the ShopBot power (right side of machine).

[[File:Nf5poweron.jpg|200x200px|thumb|left|Turn on the power]]
<div style="clear: both"></div>

7. Press RESET on the remote.

[[File:Nf6reset.jpg|thumb|200x200px|left|Press RESET]]
<div style="clear: both"></div>

8. Start ShopBot 3 Software

[[File:Nf7shopbotswr.jpg|thumb|200x200px|left|Start ShopBot software]]
<div style="clear: both"></div>

9. Open the Key Pad

[[File:Nf8keypad.jpg|thumb|200x200px|left|Open KeyPad]]
<div style="clear: both"></div>

10. Use the arrow keys to move the head around.
*On the keyboard: use the arrow keys for XY movement, or Page UP/Page DOWN to move Z axis.
*On screen: use the arrow buttons to manually move the spindle, or type the destination coordinates in X,Y,Z and press the GOTO button.

[[File:Nf9arrow.jpg|thumb|200x200px|left|Use arrow keys to move]]
<div style="clear: both"></div>

11. Load the spoilboard (if required) and material.

12. Start the vacuum table per vacuum table instructions.