Editing Instructions:ShopBot 3-Axis CNC Mill (section)

==== '''SPRAY ADHESIVE METHOD''' ====
It is also possible to use spray adhesive to secure the entire workpiece to the secondary spoilboard.

# Use sandpaper to knock down any high spots on the glue spoilboard (if required).
# Cover both the bottom of the workpiece and the appropriate part of the spoilboard with masking tape or painter’s tape.
# Spray both surfaces with spray adhesive (available at most hardware stores).
# Press the two surfaces firmly together and hold for 30 seconds.
# Test the hold by trying to move the workpiece sideways.
Do not use glue on the screw spoilboard or main spoilboard. Do not use screws on the glue spoilboard.