More actions
- 13:53, 2024 September 9 Safety Committee Member Rep (hist | edit) [602 bytes] Ttenbergen (talk | contribs) (Created page with "The Fablab has several {{PAGENAME}}s (see Safety Committee#Safety Committee Members). These {{PAGENAME}}s are voted in and can receive up to 12hrs of volunteer time per month based on activities. They usually serve for a term of 2 years. ==Responsibilities== * attend pre-meeting Safety Inspection and Emergency Preparedness Drill and be prepared to discuss at meeting * attend Safety Committee Meetings, at least every 3 months but more often as required...")
- 13:52, 2024 September 9 Member Council Safety Lead (hist | edit) [1,635 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}}s is a co-chair of the Fablab's Safety Committee and a member of Member Council. ==Responsibilities== * participates in the Safety Sub Committee to ensure the Fabrication Lab is following safe practices and procedures. * attend pre-meeting Safety Inspection and Emergency Preparedness Drill and be prepared to discuss at meeting * attend Safety Committee meetings, at least every 3 months but more often as required * document review, in...")
- 13:52, 2024 September 9 Member Council Security Lead (hist | edit) [118 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}}s a member of Member Council. {{Discuss | needs terms of reference}} Category:Member Council")
- 13:52, 2024 September 9 Member Council Training Lead (hist | edit) [118 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}}s a member of Member Council. {{Discuss | needs terms of reference}} Category:Member Council")
- 13:46, 2024 September 9 Safety Committee (hist | edit) [673 bytes] Ttenbergen (talk | contribs) (Created page with "The Fablab has a Safety Committee in accordance with [https://www.gov.mb.ca/labour/safety/pdf/whs_workplace_safety_act_and_regs.pdf Workplace Safety and Health Regulations and Section 40(1) - 41.3 of The Workplace Safety and Health Act]. The Fablab treats members as workers in this context. Safety Committee Meetings The role of the committee is {{Discuss | scope, objectives, roles, responsibilities, and deliverables }} === Safety Committee Members === * Employe...")
- 13:29, 2024 September 9 Safety Incident Review (hist | edit) [1,177 bytes] Ttenbergen (talk | contribs) (Inspired and partly taken from https://northforge.ca//wp-content/uploads/2023/01/North-Forge-Safety-Manual-Winnipeg_Oct.21-22.pdf "Safety incident and near miss reporting")
- 22:35, 2024 September 7 Soldering workstation (hist | edit) [677 bytes] Ttenbergen (talk | contribs) (Created page with "We have set up one of the workstations in the IoT room as a soldering workstation. {{Discuss| Second from right? }} It includes the following: * Soldering fume extractor * Weller Soldering Station * Weller WR 3M (soldering system) * Weller Desoldering Iron {{Discuss | * what else * any specific other tools from IoT Innovation Lab? }} {{Discuss | * this might be best off if it becomes, or at least gets, its own Category:Multi tool template...")
- 22:28, 2024 September 7 Soldering fume extractor (hist | edit) [281 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=IoT Innovation Lab |model=Hakko FA-430 |link to manual=* [https://www.hakko.com/english/support/doc/result.php?mode=download&seq=5333 manual] |consumables=* A1573 Main filter * A1572 Pre-filter |equipment_type=tool }}")
- 22:58, 2024 September 3 Vulcan Anvil (hist | edit) [149 bytes] Mpatryluk (talk | contribs) (Page Creation)
- 21:40, 2024 September 3 Spill kit (1st floor) (hist | edit) [185 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 21:39, 2024 September 3 Spill kit (3rd floor) (hist | edit) [209 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 21:39, 2024 September 3 Hazardous materials fridge (hist | edit) [647 bytes] Ttenbergen (talk | contribs) (Created page with "{{tool}}")
- 15:10, 2024 September 3 Lost and Found (hist | edit) [268 bytes] Ttenbergen (talk | contribs) (Created page with "{{Discuss | * I think the closest thing we have is to leave it where it is and post on general or the room where you found it. If it's large and in the way, put it on the jail. Anyone, please correct me if we have an actual lost and found. }} Category:Security")
- 11:20, 2024 September 3 Sandblasting Cabinet (large) (hist | edit) [393 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Metalworking Room }}")
- 23:51, 2024 September 1 RapidLift Cart (hist | edit) [574 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Woodworking Room |model=PA SKU: 8662256 |work envelope=* Weight Capacity 500 lb (226.79 kg) * Height Range 14-1/4 to 50-3/4 in. (36.19 to 128.90 cm) * Table Size 27-3/4 x 17-3/4 in. (70.48 x 45.08 cm) |link to manual=https://www.princessauto.com/file/general/8662256_manualhb_00_01_v01_manuel_enfr.pdf |related tools=Sawstop Industrial Cabinet Saw |other details=The RapidLift Cart is primarily used as an outfeed to the Sawstop Industrial Cabinet Saw....")
- 23:36, 2024 September 1 Motorcycle lift (hist | edit) [484 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 23:12, 2024 September 1 CorelDraw for Fablab (hist | edit) [691 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session}}")
- 23:11, 2024 September 1 Front elevator lobby/Precautions (hist | edit) [264 bytes] Ttenbergen (talk | contribs) (Created page with "This room is outside of the North Forge security perimeter. The space is shared with other tenants of the building, so do not leave things here that would get into anyone's way or that could get stolen. Do not block the path as it is part of our escape routes.")
- 23:06, 2024 September 1 24/7 video monitoring and recording (hist | edit) [197 bytes] Ttenbergen (talk | contribs) (Created page with "North Forge has over 40 video cameras continuously monitoring and recording the entire facility. We will review video if there are security, safety or housekeeping concerns. Category:Security")
- 23:03, 2024 September 1 Front elevator lobby (hist | edit) [18 bytes] Ttenbergen (talk | contribs) (Created page with "{{Room|floor=1st}}")
- 23:03, 2024 September 1 Bike parking (hist | edit) [116 bytes] Ttenbergen (talk | contribs) (Created page with "You can park your bike in the Design Space near the door to the Front elevator lobby. Category:Security")
- 22:54, 2024 September 1 Room between Design Space and Metalworking Room/Precautions (hist | edit) [71 bytes] Ttenbergen (talk | contribs) (Created page with "Do not block the paths in this room as it is part of our escape routes.")
- 22:53, 2024 September 1 Room between Design Space and Metalworking Room (hist | edit) [18 bytes] Ttenbergen (talk | contribs) (Created page with "{{Room}}")
- 22:43, 2024 September 1 Back elevator lobby/Precautions (hist | edit) [152 bytes] Ttenbergen (talk | contribs) (Created page with "Make sure the door is securely closed or the Back door monitor will go off. Do not block the path to this door as it is part of our escape routes.")
- 22:42, 2024 September 1 Back elevator lobby (hist | edit) [18 bytes] Ttenbergen (talk | contribs) (Created page with "{{Room}}")
- 22:40, 2024 September 1 Back door monitor (hist | edit) [231 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 15:25, 2024 September 1 Testpage (hist | edit) [1,563 bytes] Ttenbergen (talk | contribs) (A place to mess around with edits that might happen to the template:tool.)
- 01:32, 2024 September 1 Combo Heat Press Machine (hist | edit) [365 bytes] Mpatryluk (talk | contribs) (Page Creation)
- 01:25, 2024 September 1 SD-360U SMT stencil printer (hist | edit) [315 bytes] Mpatryluk (talk | contribs) (Page Creation)
- 11:02, 2024 August 30 Big Blue Laser/Maintenance notes (hist | edit) [142 bytes] Ttenbergen (talk | contribs) (Created page with "* There have been recurring problems with the display panel, Jeff is aware; I think the solution was to clean and re-seat the connecting cable")
- 09:44, 2024 August 30 Giant Blue Laser/Maintenance Notes (hist | edit) [267 bytes] Ttenbergen (talk | contribs) (Created page with "Members must not do maintenance on this tool unless specifically authorized. === Control display === * this has failed a few times...")
- 23:08, 2024 August 29 Infrastructure (hist | edit) [494 bytes] Ttenbergen (talk | contribs) (Created page with "There are some infrastructure components at North Forge. Generally, members should not need to worry about these. Talk to Jeff or Tina before messing with any of these. {{#cargo_query: intro=North Forge has the following tools: |tables=tool, room |join on=tool.room=room._pageName |fields=tool._pageName=Tool, room=Room, concat(floor, " floor")=Floor |where=equipment_type="infrastructure" |order by=tool._pageName |limit=500 |default=no tools found |format=dynamic table |r...")
- 22:40, 2024 August 29 Boardroom/Precautions (hist | edit) [233 bytes] Ttenbergen (talk | contribs) (Created page with "The lobby is more publicly accessible than other parts of the fablab, so don't leave items here. It is not considered part of our manufacturing space, so don't do work here that would negatively affect others who are not wearing PPE.")
- 22:36, 2024 August 29 Boardroom (hist | edit) [192 bytes] Ttenbergen (talk | contribs) (Created page with "{{Room}}")
- 22:31, 2024 August 29 Consumables (hist | edit) [609 bytes] Ttenbergen (talk | contribs) (Created page with "The Fablab has some consumables on hand that are available for purchase. * [https://docs.google.com/spreadsheets/d/1sdhrBBLoDP4dLEXfRE9SEQ6euOV1LXbuFMtUFppU3ME/edit?gid=0#gid=0 Consumables list] In most cases there will be a clipboard near the consumables where you would write down what you used. If you notice that we are running low on any consumables, post on the #consumables channel in Slack.")
- 21:55, 2024 August 29 Tools test (hist | edit) [839 bytes] Ttenbergen (talk | contribs) (Created page with "{{#cargo_query: intro=The following tools have no Training Sessions but do have links to SWPs or a manual : |tables=tool, training_session |join on=training_session.tools HOLDS tool._pageName |fields=tool._pageName=Tool, link_to_manual, SWP_link |order by=tool._pageName |where=training_session._pageName is null AND (link_to_manual > "" or SWP_link > "") |limit=500 |default=no tools found |format=dynamic table |rows per page=500 }}")
- 02:03, 2024 August 28 So You Finished Your Safety Orientation. Now What? (hist | edit) [2,663 bytes] Mpatryluk (talk | contribs) (Created page with "== WORK IN PROGRESS == So, you're a new member and you just finished your Safety Orientation. Welcome! But now you're standing there with all this equipment and material around you and no idea what you can do right at this moment. The good news is that there are a few things you ''should'' do, and a few things you ''can'' do. '''What You Should Do''' * Introduce yourself on Slack and explore/subscribe to the channels that interest you. Some useful ones are: ** 125-tr...")
- 07:06, 2024 August 24 Vending machines (hist | edit) [397 bytes] Ttenbergen (talk | contribs) (Created page with "We have three. Two are in the Lobby and sell food and drinks. One is in the General Assembly Area and sells tools and equipment. * Post to the Slack #consumables channel if the machine runs out of something * Discuss at Member council meetings if you would like to see something added to the machines * Post on the Slack #broken channel if one of the machines is misbehaving")
- 22:47, 2024 August 23 Garbage (hist | edit) [1,031 bytes] Ttenbergen (talk | contribs) (Created page with "{{Discuss | this needs more work... * safe handling, assume it's not safe, gloves etc * two carts upstairs, one for sheet goods. Do we have any thoughts on the acceptability of just leaving bags in front of the cart? * looks like we are using that box cart on 1 for garbage now. Is that a thing? * guidelines about breaking things down so there are no sharp corners and max sizes for hard stuff in bags * guidelines about securing bags with sawdust and not overfilling...")
- 09:23, 2024 August 23 Filament Connector (hist | edit) [458 bytes] Mstapley (talk | contribs) (Created page with "{{Tool |photo=P1S.jpg |room=3D Printing Room |model=Bambu Labs P1S |work envelope=256 x 256 x 256 mm (10.08 x 10.08 x 10.08 in) |link to manual=https://wiki.bambulab.com/en/p1/manual |trainers=Richard Venzon |consumables=North Forge filament available for free (small jobs only). NF filament is labelled and stored in the bin with the red lid by the door. |other details= The Bambu Labs P1S is a general-purpose, high-speed FDM 3D printer. It is used to 3D print objects usin...")
- 23:33, 2024 August 22 Member Council (hist | edit) [1,704 bytes] Ttenbergen (talk | contribs) (Created page with "{{Discuss | * What do we want to say about this? List roles/people? ~~~~ }}")
- 22:43, 2024 August 22 Volunteering at North Forge (hist | edit) [648 bytes] Ttenbergen (talk | contribs) (Created page with "You can volunteer at the fab lab and reduce your expenses. See the Slack channel "125-volunteer" and the board with volunteer tasks in the Lobby. Before you take on a volunteer task, check the board in the Lobby, the [https://docs.google.com/spreadsheets/d/1RHmgY7MAXwpN9SSh4tb7-cMsREUDKOMajBOZ6R5phzo/edit?gid=1011365983#gid=1011365983 Volunteer Task List Goolge Sheet] or check with member council's volunteer lead to make sure the task is approved. Approve...")
- 09:02, 2024 August 22 N/A (hist | edit) [163 bytes] Ttenbergen (talk | contribs) (Created page with "This is a placeholder page for scenarios in which the structured data on this wiki doesn't quite apply. Hopefully it is obvious from whatever brought you here why.")
- 08:55, 2024 August 22 Fusion360 (hist | edit) [368 bytes] Ttenbergen (talk | contribs) (Created page with "{{Software |associated_tools=ShopBot 3-Axis CNC Mill; ShopBot 5-Axis CNC Mill; Tormach 1100 Personal CNC Milling Machine |general_purpose=CAD software that includes CAM software we use to generate toolpaths for CNC machines. }} {{PAGENAME}} is the preferred software to generate toolpaths for the Tormach 1100 Personal CNC Milling Machine.")
- 16:31, 2024 August 19 Drum Polisher (hist | edit) [588 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 16:29, 2024 August 19 Small Tumbler (hist | edit) [331 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 00:51, 2024 August 17 Solidworks (hist | edit) [93 bytes] Ttenbergen (talk | contribs) (Created page with "{{Software}}")
- 00:41, 2024 August 17 OMAX Intelli-MAX (hist | edit) [142 bytes] Ttenbergen (talk | contribs) (Created page with "{{Software}}")
- 00:40, 2024 August 17 Tormach PC (hist | edit) [90 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |room=Metalworking Room }}")
- 00:32, 2024 August 17 IOT Room PC (hist | edit) [49 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC}}")
- 00:30, 2024 August 17 VPN PC (hist | edit) [240 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |room=N/A }} {{Discuss | For now instructions are at https://northforge.ca/community/wp-content/uploads/2023/09/NorthForge-VPN-Connection-.pdf#new_tab - can we move those to the wiki? Are they up-to-date? }}")
- 00:29, 2024 August 17 Water Jet PC (hist | edit) [107 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |room=Metalworking Room }}")
- 00:29, 2024 August 17 HP Plotter PC (hist | edit) [235 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |room=Design Space }}")
- 00:29, 2024 August 17 Vinyl Cutter PC (hist | edit) [96 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |room=Design Space }}")
- 00:29, 2024 August 17 Roland PC (hist | edit) [95 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |room=Design Space }}")
- 00:29, 2024 August 17 3-Axis CNC PC (hist | edit) [75 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |room=CNC Woodworking Room }}")
- 00:29, 2024 August 17 5-Axis CNC PC (hist | edit) [75 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |room=CNC Woodworking Room }}")
- 00:28, 2024 August 17 Helix and Big Red Laser PC (hist | edit) [114 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |software=CorelDraw |room=Laser Room }}")
- 00:28, 2024 August 17 Big Blue Laser PC (hist | edit) [76 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC |software=CorelDraw |room=Laser Room }}")
- 00:12, 2024 August 17 Giant Blue Laser PC (hist | edit) [112 bytes] Ttenbergen (talk | contribs) (Created page with "{{PC| |software=CorelDraw |tools_driven_by=Giant Blue Laser (Epilog Fusion Pro 16000) |room=Laser Room |other details=This is a test detail }}")
- 00:05, 2024 August 17 Computers for member use (hist | edit) [619 bytes] Ttenbergen (talk | contribs) (Created page with "__NOCACHE__ You can use this line to edit an existing or start a new PC page: {{#forminput:form=PC|button text=Edit wiki page for this PC|autocomplete on category=PC|returnto=Computers for member use|reload}} {{#cargo_query: intro=North Forge has the following PCs: |tables=pc, room |join on=pc.room=room._pageName |fields=pc._pageName=PC, room=Room, concat(floor, " floor")=Floor |order by=pc._pageName |limit=500 |default=no PCs found |format=dynamic table |rows per page=...")
- 23:32, 2024 August 16 Software (hist | edit) [214 bytes] Ttenbergen (talk | contribs) (Created page with "{{#cargo_query: |tables=software |fields=_pageName, general_purpose, associated_tools |order by=_pageName |default=No software found |format= }} * ")
- 23:21, 2024 August 16 VersaWorks (hist | edit) [142 bytes] Ttenbergen (talk | contribs) (Created page with "{{Software}}")
- 23:00, 2024 August 16 Aspire (hist | edit) [315 bytes] Ttenbergen (talk | contribs) (Created page with "{{Software}}")
- 22:45, 2024 August 16 CorelDraw (hist | edit) [413 bytes] Ttenbergen (talk | contribs) (Created page with "{{Software}}")
- 21:39, 2024 August 16 3d Print Room PC (hist | edit) [50 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 21:02, 2024 August 15 NF Map Demo (hist | edit) [1,078 bytes] Ttenbergen (talk | contribs) (Created page with "{{#display_map: 80,80~popup title~popup text~Testtool.png; 50,50~popup title~popup text |image layers=1st Floor Plan.png |height=740 |width=450 |zoom=2 }}")
- 09:57, 2024 August 14 Fire Alarm Pull Station (hist | edit) [251 bytes] Ttenbergen (talk | contribs) (Created page with "{{Discuss|See Eye Wash Station.}} Category:Safety")
- 09:57, 2024 August 14 Breaker Panel (hist | edit) [615 bytes] Ttenbergen (talk | contribs) (Created page with "{{Discuss|See Eye Wash Station.}} Category:Safety")
- 09:56, 2024 August 14 Sharps Disposal Station (hist | edit) [58 bytes] Ttenbergen (talk | contribs) (Created page with "{{Discuss|See Eye Wash Station.}} Category:Safety")
- 23:27, 2024 August 13 Paint Room Drying Shelf (hist | edit) [469 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}} is a set of shelves at the west end of the Paint Room. {{Discuss|This could use a photo. }} {{Discuss | * do we have rules around this already? Is this consistent? ~~~~ }} Any items with paint or similar finish drying should be stored on the {{PAGENAME}} with the Paint Room Fume Extractor left running to exhaust VOCs as they dry. Category:Storage")
- 23:19, 2024 August 13 In-line Filament Dryer (hist | edit) [365 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=3D Printing Room | model = | work envelope = | link to manual = | related tools = | trainers = | knowledge keepers = Kerry Stevenson | SDS link = | SWP link = | other details= North Forge has an inline filament dryer you can use to pre-condition filament as you print. It is located to the left of the Bambu Labs X1 Carbon FDM 3D Printer. }}")
- 23:08, 2024 August 13 Material Safety Data Sheet (MSDS) (hist | edit) [742 bytes] Ttenbergen (talk | contribs) (Created page with "A safety data sheet, material safety data sheet (MSDS), or product safety data sheet is a document that lists information relating to occupational safety and health for the use of various substances and products [https://en.wikipedia.org/wiki/Safety_data_sheet]. List of the tool-associated MSDSs at North Forge: {{#cargo_query: intro=List of the tool-associated MSDSs at North Forge: |tables=tool, room |join on=tool.room=room._pageName |fields=tool._pageName=Tool, SDS_l...")
- 22:47, 2024 August 13 Lobby/Precautions (hist | edit) [233 bytes] Ttenbergen (talk | contribs) (Created page with "The lobby is more publicly accessible than other parts of the fablab, so don't leave items here. It is not considered part of our manufacturing space, so don't do work here that would negatively affect others who are not wearing PPE.")
- 22:44, 2024 August 13 Lobby (hist | edit) [19 bytes] Ttenbergen (talk | contribs) (Created page with " {{Room|floor=3rd}}")
- 14:40, 2024 August 11 WHMIS (hist | edit) [2,041 bytes] John Hache (talk | contribs) (created page, sample policy info)
- 00:40, 2024 August 11 Oily Rags Bins (hist | edit) [153 bytes] Ttenbergen (talk | contribs) (Created page with "We have the following oily rags bins: * Oily rags bin (metal working room) * Oily rags bin (paint room) {{Oily rags bins}}")
- 00:20, 2024 August 11 Consequences of Inappropriate Storage (hist | edit) [467 bytes] Ttenbergen (talk | contribs) (Created page with " {{Discuss | We had talked about a process for items in storage when your membership ends or you haven't paid for your spot - was a decision made? This would then likely also apply to Template:Temporary storage. }} * ")
- 00:18, 2024 August 11 Projects in Progress (hist | edit) [1,310 bytes] Ttenbergen (talk | contribs) (Created page with "Sometimes you will work on a project where you need to leave items on an assembly table or similar. Items left unstored that don't meet the definition of a project in progress may go to The Jail or be disposed of according to Storage#Consequences_of_inappropriate_storage_use. Category:Storage")
- 00:13, 2024 August 11 Marney (hist | edit) [146 bytes] Ttenbergen (talk | contribs) (Created page with "Marney is the Director of the Fabrication Lab. * You will need to talk to Marney to get things out of The Jail Category:North Forge Staff")
- 00:11, 2024 August 11 Emelia (hist | edit) [150 bytes] Ttenbergen (talk | contribs) (Created page with "Emelia is the FabLab Assistant. She can help you with things like * access to Skedda * Rentable member storage Category:North Forge Staff")
- 00:05, 2024 August 11 The Jail (hist | edit) [672 bytes] Ttenbergen (talk | contribs) (Created page with "{{PAGENAME}} is where your items may end up if you didn't put them into your Rentable member storage (aside from Projects in progress). {{PAGENAME}} is located to the near the main entrance to the General Assembly Area. {{Discuss | This could use a photo. }} If your item has gone to Jail you will need to talk to Marney to get it out. You will have to pay a fine. {{Discuss | We will want a link to the housekeeping rules or whatever that explain this....")
- 00:00, 2024 August 11 Flammables Cabinets (hist | edit) [233 bytes] Ttenbergen (talk | contribs) (Created page with "We have the following flammables cabinets: * Flammables cabinet (epoxy room) * Flammables cabinet (metal working room) * Flammables cabinet (paint room) {{Flammables cabinet}} Category:Storage")
- 23:48, 2024 August 10 Member Filament Storage in the 3D Printing Room (hist | edit) [1,277 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}} is a set of shelf drawers on the bottom of the big shelf in the 3D Printing Room. {{Discuss | This could use a picture. }} Members can store their filament there. Make sure you put your name on the roll. If there is no name on a roll, or your membership ends, the roll may be disposed of as per Storage#Consequences_of_inappropriate_storage_use. Space on here is at a premium, and when it fills up we may ask the owners of any rolls that hav...")
- 23:43, 2024 August 10 Finished Print Box in the 3D Printing Room (hist | edit) [542 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}} is a set of two labelled boxes on the very left side of the shelf in the 3D Printing Room. {{Discuss| This could use a photo}} If you come across a finished print on one of the printers, you can put it into the top box. The bottom box will have a timestamp and a hold period. Any prints older than that timestamp will be in the bottom box. Any prints still present in the bottom box after the hold period will be thrown out, the newer prints moved t...")
- 23:29, 2024 August 10 CNC Spoilboard Storage (hist | edit) [1,103 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}} is a rolling cart for spoilboards for use with the ShopBot 3-Axis CNC Mill Model or the ShopBot 5-axis CNC Mill Model. It usually stored in the CNC Woodworking Room. {{Discuss|This could use a photo. }} {{Temporary storage}} Category:Storage")
- 23:23, 2024 August 10 Tool Room/Precautions (hist | edit) [51 bytes] Ttenbergen (talk | contribs) (Created page with "There are no special precautions for the tool room.")
- 23:08, 2024 August 10 Temporary Long Lumber Storage (hist | edit) [170 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}} is a set of shelves at the north end of the General Assembly Area. {{Temporary storage}} Category:Storage")
- 23:08, 2024 August 10 Temporary Large Sheet Storage (hist | edit) [260 bytes] Ttenbergen (talk | contribs) (Created page with "The {{PAGENAME}} is a rack for large sheets of material such as MDF, plywood or plastic. It is on the east side of the General Assembly Area, just next to the Tool Room. {{Temporary storage}} Category:Storage")
- 23:07, 2024 August 10 Tool Room (hist | edit) [19 bytes] Ttenbergen (talk | contribs) (Created page with " {{Room|floor=3rd}}")
- 23:03, 2024 August 10 Storage (hist | edit) [1,950 bytes] Ttenbergen (talk | contribs) (Created page with "We have several options to store materials you need for your work at North Forge onsite. If you leave your stuff lying around otherwise, beyond Projects in progress, your stuff will end up in The jail. ===Storage and similar=== * Rentable member storage * Temporary large sheet storage * Temporary long lumber storage * CNC Spoilboard storage * Flammables cabinets * Member filament storage in the 3D Printing Room * Finished print box in...")
- 22:52, 2024 August 10 Rentable member storage (hist | edit) [820 bytes] Ttenbergen (talk | contribs) (Created page with "North Forge has the following member storage spots for rent: * shelves in the Design space and the Metal working room on the first floor * shelves in the General Assembly Area and the Laser room on the third floor * floor space in the basement * floor space in the metal working room Talk to Emelia if you would like to rent a storage space. {{Discuss | Can we put the cost and availability here? Or does NF already have a spot for...")
- 22:43, 2024 August 10 Bug demonstrator page for cargo query cell merge with links (hist | edit) [720 bytes] Ttenbergen (talk | contribs) (Created page with "__NOCACHE__This is a temporary page to demonstrate a problem with the Cargo extension as discussed at {{#cargo_query: intro=This works as expected |tables=room |fields=concat(floor, " floor")=Floor,_pageName=Room |order by=floor, _pageName |format=table |merge similar cells=yes }} {{#cargo_query: intro=This breaks the merge |tables=room |fields=concat("", floor, " floor")=Floor,_pageName=Room |order by=floor, _pageName |format=table |merge similar cel...")
- 22:17, 2024 August 10 Flammables Cabinet (paint room) (hist | edit) [64 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Paint Room }}")
- 22:17, 2024 August 10 Flammables Cabinet (epoxy room) (hist | edit) [64 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Epoxy Room }}")
- 22:15, 2024 August 10 Flammables Cabinet (metal working room) (hist | edit) [71 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Metalworking Room |other details=* See flammables cabinets }}")
- 22:15, 2024 August 10 Oily Rags Bin (metal working room) (hist | edit) [174 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Metalworking Room |other details=See oily rags bins for more info. The oily rags bin is located in near the flammables cabinet (metal working room). }}")
- 22:13, 2024 August 10 Oily Rags Bin (paint room) (hist | edit) [151 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Paint Room |other details=see oily rags bins }}")
- 22:11, 2024 August 10 Pressure washer (hist | edit) [104 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Metalworking Room |work envelope=Outside! As in, only use this outside in the back lane. }}")
- 19:37, 2024 August 8 Fire Extinguisher (hist | edit) [225 bytes] Ttenbergen (talk | contribs) (Created page with "See Eye wash station.")
- 19:35, 2024 August 8 Eye Wash Station (hist | edit) [3,631 bytes] Ttenbergen (talk | contribs) (Created page with "{{Discuss| Doug pointed out that we may not have good documentation on these, let's change that. Here is a start... This should contain instructions on how to use the eye wash stations. It should probably also include whom to notify, and a link to the incident form, since use of a wash station would warrant a form. Maybe the form is how we find out that they were used, too. As much as that is internal info, I think it might also be good to add if we have spares on ha...")
- 16:21, 2024 August 6 Woodworking dust collection interlock system (hist | edit) [751 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}} The dust collectors in the Woodworking Room are interlocked withe several of the stationary tools, and the dust collectors themself will only turn on if the room exhaust fans are on. Dust extractor (CWI) bandsaw and mitre saw Dust extractor (CWI) sanding Dust extractor (CWI) table saw Dust extractor (CWI) wide belt sander Dust extractor (General International) sanding Dust extractor (CWI) shopbot and planer CNC woodworking...")
- 16:21, 2024 August 6 CNC woodworking room exhaust fan (hist | edit) [261 bytes] Ttenbergen (talk | contribs) (Created page with "{{tool}}")
- 16:20, 2024 August 6 Woodworking room exhaust fan (hist | edit) [257 bytes] Ttenbergen (talk | contribs) (Created page with "{{tool}}")
- 12:26, 2024 July 23 Tools with related tools (hist | edit) [449 bytes] Ttenbergen (talk | contribs) (Created page with "This is mostly a reference page to show which tools have related tools. {{#cargo_query: intro=North Forge has the following tools: |tables=tool, room |join on=tool.room=room._pageName |fields=tool._pageName=Tool, related_tools |order by=tool.related_tools |limit=500 |default=no tools found |format=dynamic table |rows per page=500 }}")
- 12:14, 2024 July 23 Laser Rotary Attachment (Helix) (hist | edit) [130 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 12:14, 2024 July 23 Laser Rotary Attachment (Big Red) (hist | edit) [106 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 11:01, 2024 July 23 Edge Sander (hist | edit) [328 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |photo= |room=Woodworking Sanding Room |link to manual= |trainers=Paolo Riva |consumables=Disc: 9in Belt: 6in x 48in }}")
- 10:08, 2024 July 23 Metal band saw (hist | edit) [160 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 14:34, 2024 July 19 FormLabs resin printers (hist | edit) [233 bytes] Ttenbergen (talk | contribs) (Created page with "{{Discuss | I think we need a generic page to avoid duplication. Possibly a fake tool page so that all common details can be on this one, and all specific things on the individual printer's pages. Not sure yet how to best do this. }}")
- 13:32, 2024 July 19 Ecopoxy materials (hist | edit) [986 bytes] Ttenbergen (talk | contribs) (Created page with "We have the following EcoPoxy products: * [https://www.ecopoxy.com/collections/all/products/flowcast FlowCast] ([https://cdn.shopify.com/s/files/1/0560/6965/files/FlowCast_Part_A_EPFLR10_en_ca.pdf?v=1701199518 Resin SDS], [https://cdn.shopify.com/s/files/1/0560/6965/files/FlowCast_Part_B_EPFLH10_en_ca.pdf?v=1685024361 Hardener SDS]) * [https://www.ecopoxy.com/collections/all/products/flowcast-spr FlowCast SPR] ([https://cdn.shopify.com/s/files/1/0560/6965/files/FlowCast...")
- 13:26, 2024 July 19 Formlabs resins (hist | edit) [1,470 bytes] Ttenbergen (talk | contribs) (Created page with "Our FormLabs resin printers {{Discuss | I think we need a generic page to avoid duplication. }} use various resins. Here is a list of what we have: {{Discuss| posted question on #consumables of what we have }}")
- 13:06, 2024 July 16 Skedda (hist | edit) [759 bytes] Ttenbergen (talk | contribs) (Created page with "Skedda is the web app we use to book equipment. === Booking restrictions === Some tools have booing restrictions that only allow them to be booked for a limited amount of time. If you have a legitimate need to book them for longer, talk to Emelia. Some users (maintenance and admins) are exempted from these rules. The exemption is set by... {{Discuss| * How is it set? What do the north forge and maintenance tags mean? }}")
- 19:57, 2024 July 8 Questions (hist | edit) [579 bytes] Ttenbergen (talk | contribs) (Created page with "Lists all pages that use Template:Discuss it also lists the question. === Questions === {{#cargo_query: tables=Discussions, _pageData |join on=Discussions._pageName=_pageData._pageName |fields=CONCAT("\[\{\{fullurl:",Discussions._pageName, "{{!}}action=edit\}\} edit]")=edit, Discussions._pageName=wiki page, who, question, _modificationDate=Last modified |limit=1000 |rows per page=200 |default=no results were found |format=dynamic table }} <!-- Not adding a what li...")
- 13:49, 2024 June 23 0th floor (hist | edit) [344 bytes] Ttenbergen (talk | contribs) (Created page with "__NOCACHE__{{#cargo_query: intro=North Forge has the following rooms: |tables=room |fields=concat(floor, " floor")=Floor,_pageName=Room, concat('', _pageName, "/Precautions")=Room precaution pages |where=floor='0th' |order by=floor, _pageName |limit=500 |default=no rooms found |format=table |merge similar cells=yes }} Category:Floor")
- 13:49, 2024 June 23 3rd floor (hist | edit) [344 bytes] Ttenbergen (talk | contribs) (Created page with "__NOCACHE__{{#cargo_query: intro=North Forge has the following rooms: |tables=room |fields=concat(floor, " floor")=Floor,_pageName=Room, concat('', _pageName, "/Precautions")=Room precaution pages |where=floor='3rd' |order by=floor, _pageName |limit=500 |default=no rooms found |format=table |merge similar cells=yes }} Category:Floor")
- 13:48, 2024 June 23 1st floor (hist | edit) [344 bytes] Ttenbergen (talk | contribs) (Created page with "__NOCACHE__{{#cargo_query: intro=North Forge has the following rooms: |tables=room |fields=concat(floor, " floor")=Floor,_pageName=Room, concat('', _pageName, "/Precautions")=Room precaution pages |where=floor='0th' |order by=floor, _pageName |limit=500 |default=no rooms found |format=table |merge similar cells=yes }} Category:Floor")
- 15:27, 2024 June 21 CNC Woodworking room vacuum (hist | edit) [454 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}")
- 15:15, 2024 June 21 Woodworking room vacuum (hist | edit) [480 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool}}") Tags: Mobile edit Mobile web edit
- 13:00, 2024 June 21 Emptying dust extractors and vacuums (hist | edit) [1,929 bytes] Ttenbergen (talk | contribs) (Created page with "We need a page for this! Category:ToDo")
- 23:09, 2024 June 16 Ultrasonic Cleaner (IoT) (hist | edit) [65 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Metalworking Room |trainers=No Training Available }}")
- 22:48, 2024 June 16 Ecopoxy Training (hist | edit) [90 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Christoff Epp |tools=Ecopoxy Workstation |rooms=Epoxy Room }}")
- 22:32, 2024 June 16 Ecopoxy Workstation (hist | edit) [355 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Epoxy Room |trainer=Christoff Epp |other details=This isn't so much a tool as it is the combination of equipment supported by our sponsor [https://www.ecopoxy.com/ Ecopoxy]. }}")
- 22:28, 2024 June 16 Lifebreath HRV (Epoxy) (hist | edit) [293 bytes] Ttenbergen (talk | contribs) (Created page with "{{Tool |room=Epoxy Room |knowledge keepers=Jeff Stobbe |other details=https://www.lifebreath.com/ }} The Lifebreath HRV is used to manage fumes in the 3D printing room. It runs automatically. Please do not touch the Lifebreath HRV without maintenance permission.")
- 22:02, 2024 June 16 Slack (hist | edit) [1,265 bytes] Ttenbergen (talk | contribs) (Created page with "''Slack'' is the internal communication tool we use at the fablab. If these instructions tell you to contact someone on Slack, but you don't have access to Slack yet follow the contact info at https://northforge.ca/contact/ .")
- 21:57, 2024 June 16 Paolo Riva (hist | edit) [11 bytes] Ttenbergen (talk | contribs) (Created page with "{{Trainer}}")
- 21:50, 2024 June 16 Training Coordinator (hist | edit) [179 bytes] Ttenbergen (talk | contribs) (Created page with "The Training Coordinator, currently John Hache, coordinates trainers and Training Sessions. Contact him on Slack if you have questions. * ")
- 21:30, 2024 June 16 Chris Brown (hist | edit) [11 bytes] Ttenbergen (talk | contribs) (Created page with "{{Trainer}}")
- 21:30, 2024 June 16 Tina Tenbergen (hist | edit) [11 bytes] Ttenbergen (talk | contribs) (Created page with "{{Trainer}}")
- 21:30, 2024 June 16 Graeson Fehr (hist | edit) [11 bytes] Ttenbergen (talk | contribs) (Created page with "{{Trainer}}")
- 21:30, 2024 June 16 Bruce McMurrich (hist | edit) [11 bytes] Ttenbergen (talk | contribs) (Created page with "{{Trainer}}")
- 21:30, 2024 June 16 Christoff Epp (hist | edit) [11 bytes] Ttenbergen (talk | contribs) (Created page with "{{Trainer}}")
- 21:29, 2024 June 16 John Hache (hist | edit) [11 bytes] Ttenbergen (talk | contribs) (Created page with "{{Trainer}}")
- 21:29, 2024 June 16 Roland Printer Training (hist | edit) [149 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Chris Brown |rooms=Design Space }}")
- 21:27, 2024 June 16 Vinyl Cutter and Heat Press Training (hist | edit) [144 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Tina Tenbergen |rooms=Design Space }}")
- 21:26, 2024 June 16 TIG Welding Training (hist | edit) [126 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Bruce McMurrich |rooms=Metalworking Room }}")
- 21:24, 2024 June 16 ShopBot CNC Router Training (hist | edit) [145 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=John Hache |rooms=CNC Woodworking Room }}")
- 21:23, 2024 June 16 Woodworking Room Training (hist | edit) [582 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Paolo Riva |rooms=Woodworking Room }}")
- 21:23, 2024 June 16 Wide Belt Sander Training (hist | edit) [119 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Christoff Epp |rooms=Woodworking Room Training }}")
- 21:22, 2024 June 16 Big Red Laser Training (hist | edit) [81 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=John Hache |rooms=Laser Room |other details=x }}")
- 21:21, 2024 June 16 Giant Blue Laser Training (hist | edit) [110 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=John Hache |rooms=Laser Room }}")
- 21:20, 2024 June 16 Basic Laser Epilog Training (hist | edit) [778 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=John Hache |rooms=Laser Room }}")
- 21:17, 2024 June 16 Waterjet Training (hist | edit) [163 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Graeson Fehr |rooms=Metalworking Room }}")
- 21:17, 2024 June 16 Lathe Training (hist | edit) [107 bytes] Ttenbergen (talk | contribs)
- 21:13, 2024 June 16 Tormach CNC Milling Training (hist | edit) [144 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=John Hache |rooms=Metalworking Room }}")
- 21:13, 2024 June 16 Festool Sanding Training (hist | edit) [258 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Christoff Epp |rooms=Woodworking Room }}")
- 21:12, 2024 June 16 MIG Welding Training (hist | edit) [176 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=John Hache }}")
- 21:09, 2024 June 16 3D Scanning Training (hist | edit) [124 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Richard Venzon |rooms=3D Printing Room }}")
- 21:09, 2024 June 16 3D Printing Basics (hist | edit) [234 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Richard Venzon |rooms=3D Printing Room }}")
- 21:07, 2024 June 16 Laser Rotary Attachment Training (hist | edit) [60 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session |trainers=Richard Venzon |rooms=3D Printing Room }}")
- 20:22, 2024 June 16 Training Sessions (hist | edit) [444 bytes] Ttenbergen (talk | contribs) (Created page with "__NOCACHE__ <!-- == dynamic table format == --> {{#cargo_query: intro=North Forge has the following training sessions: |tables=training_session |fields=trainers, cost, tools, rooms |order by=_pageName |limit=500 |default=no training sessions found |format=dynamic table |rows per page=500 }}")
- 16:46, 2024 June 16 Training sessions (hist | edit) [367 bytes] Ttenbergen (talk | contribs) (Created page with "North Forge provides training sessions for our equipment. Here is a list of the sessions and their trainers. * <query to follow>Category:Todo * ")
- 16:44, 2024 June 16 Trainers (hist | edit) [708 bytes] Ttenbergen (talk | contribs) (Created page with "Trainers at North Forge are generally members and private contractors. Here is a list of our trainers and the Training sessions they teach. * <query to follow>Category:Todo * ")
- 16:35, 2024 June 16 Richard Venzon (hist | edit) [11 bytes] Ttenbergen (talk | contribs) (Created page with "{{Trainer}}")
- 15:53, 2024 June 16 3D Printing - Form2 SLA Resin Printer Training (hist | edit) [232 bytes] Ttenbergen (talk | contribs) (Created page with "{{Training Session | Trainer = Richard Venzon | Cost = 57.50$ | Tools = Formlabs Form 2 Resin 3D Printer (DomineeringPig); Formlabs Form 2 Resin 3D Printer (LovingCosset) | Training materials = }}")
- 08:30, 2024 June 13 Back elevator/Instructions (hist | edit) [34 bytes] John Hache (talk | contribs) (Created page with "The back elevator is used to access the basement, first floor, and third floor. To operate it, make sure both gates or doors are closed. Press and hold the UP or DOWN button to move the elevator. Note that it is possible to get stuck in the basement if someone moves the elevator. If you're working in the basement: * Do not close the exterior doors. * Bring a cell phone with you * Post on Slack letting people know that you're working in the basement and to contact you i...")