Instructions:Aspire

This is a spot for information about Vectric Aspire.

1. Create new part
   1. Stock setup opens by default
   2. Material X and Y dimensions: align long dimension of stock with X (long) axis of ShopBot for convenience
   3. Material thickness: measure with calipers
   4. Z zero: suggest zero to bottom of stock (top of spoilboard) to reduce impact of measuring errors
2. Import DXF
3. Resize and position DXF
4. Check DXF for open loops
5. Tool setup
6. Pocket cuts
7. Profile cuts
   1. Inside/Outside/On
   2. Tabs
8. Drill
9. Preview
10. Export
    1. SBP inch