Graphtec FC8000-130 Vinyl Cutter

Tools
	<img alt="Picture of Graphtec FC8000-130 Vinyl Cutter in the fablab" src="/images/thumb/2/2a/Graphtec_Vinyl_Cutter.png/300px-Graphtec_Vinyl_Cutter.png" decoding="async" width="300" height="225" class="mw-file-element">
Model	FC8000-130
Room	Design Space
Work envelope/max capacity
Link to manual	https://www.graphtecamerica.com/cp-download-fc8000-1
Related tools	;
Trainer(s)	Tina Tenbergen
Training Sessions	Vinyl Cutter and Heat Press Training;
Knowledge keeper(s)	Jamie O'Neill
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure	https://northforge.ca/community/wp-content/uploads/2024/01/21.-Vinyl-Cutter-SWP.pdf
Consumables	North Forge provides vinyl and HTV and bills for it, or you can bring your own.
Software	CorelDraw;
Equipment type	tool

Design Space Precautions apply
You will be working in the Design Space . In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: don't put food in the garbage bins, there are mice we don't want to feed Several machines use vinyl; be careful when handling the rolls because you can damage them and in turn damage the sensitive vinyl equipment This space is partially open to the public - do not leave sharp objects lying around. We have some communal sharp tools in a secret place; ask a nearby helpful person or post on Slack if you would like to know where they are.