Laser Rotary Attachment (Helix)

GeneralInstructions

Tools
Model
Room	No room assigned
Work envelope/max capacity
Link to manual
Related tools
Trainer(s)
Training Sessions	no training sessions include this tool
Knowledge keeper(s)
Training document(s)
Material Safety Data Sheet (MSDS)
Safe Work Procedure
Consumables
Software	this machine has no software listed
Equipment type	tool

[[{{{room}}}/Precautions | {{{room}}} Precautions]] apply

You will be working in the [[ {{{room}}} ]]. In order to keep safe from hazards created by you or other workers using any of the tools in this room, the following precautions apply in addition to any other precautions: {{:{{{room}}}/Precautions}}

edit these instructions at Instructions:Laser Rotary Attachment (Helix)

• ALWAYS turn off the laser before installing or removing the accessory, otherwise you will fry the laser's motherboard and make many people very unhappy
• Rotate your artwork 90 degrees - the rotary accessory replaces linear Y axis (vertical) movement with rotation
• Keep your artwork near the top of the page, otherwise the accessory will rotate before starting
• The rotary accessory for the Helix has a set of small wheels that you can use for objects with large bases
• Watch out for handles and other things that can interfere with rotation
• If you're trying to engrave circles on tapered glasses, they will likely come out skewed. You can either try to adjust your image to counteract the skew, or you can make a custom holder for your glass such that both ends are the same diameter.